Follow-ups left open by the busy-window session-lifetime fix (#442)

オープン
#443 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
35/100
issue の種類
バグ
明瞭さ
明確に書かれている
活発さ
活発
技術スタック
c, shell
領域
embedded-iot

調査の方向性

Read the Jaguar-family Stop() and with_ccx implementations, the RTL8733B override for comparison, and the documented IRadio::ArmChannelBusy contract. Also inspect tests/busy_window_probe.sh and the relevant src/<gen>/CLAUDE.md files; validate the proposed lifecycle and locking changes with the probe, including its revive mode and reps 2..N. Done means the three follow-ups are addressed and the behavior change is measured.

索引モデルが issue の本文から書いたものです。

説明

enhancement

Left open by the busy-window session-lifetime fix (#442, merged as 09eb26a). Closes item 2 of #441.

1. An arm issued AFTER Stop() still succeeds on Jaguar1/2/3

#442 makes Stop() forget a window armed before the teardown. It does not close the other direction: with_ccx on the three Jaguar families gates on _brought_up, which no Stop() clears, so ArmChannelBusy() after a Stop() arms a torn-down chip and the read touches CCX registers on it. The RTL8733B closes this (its Stop() clears _phy_ready under the recursive _reg_mu it holds for the whole body); the Jaguars have neither half. Documented at IRadio::ArmChannelBusy and in each src/<gen>/CLAUDE.md.

Closing it means clearing _brought_up in the Jaguar Stop()s, which gates other paths (the band_change TXAGC re-fold in FastRetune, among others), so it is a behaviour change on its own and wants its own measurement — tests/busy_window_probe.sh --mode revive reps 2..N are exactly the sequence that would start refusing.

2. Jaguar2/3 with_ccx reads _brought_up before taking _reg_mu

Both overrides check the flag unlocked and then take _reg_mu. The RTL8733B override's comment already names the shape: a data race on the flag, and a TOCTOU where the check passes, the lock blocks behind a concurrent Stop(), and the register access proceeds against a card that has just been powered down. Pre-existing; with_ccx is single-control-thread by contract so it is latent, but it costs nothing to read the flag under the lock, and item 1 makes the flag load-bearing.

3. tests/busy_window_probe.sh: stale arm body left indented

#442 removed the tautological if [ "$realtek_sensor" = "1" ] around the stale arm but left its body indented one level. Cosmetic.

主要言語
C
スター
56
フォーク
29
平均マージ
3時間 43分
マージ済み PR(30日)
75

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

OpenIPC/devourer のほかの issue

OpenIPC/devourer の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。