Follow-ups left open by the busy-window session-lifetime fix (#442)

Ouverte
#443 0 commentaires 0 réactions 0 personnes assignées Voir sur GitHub

Les mainteneurs répondent en général sous 1 jour

Personne n'a encore pris cette issue.

Évaluation

Difficulté
4/5
Temps estimé
3-5 jours
Accessibilité débutants
35/100
Type d'issue
Bug
Clarté
Clairement spécifiée
Activité
Active
Stack technique
c, shell
Domaine
embedded-iot

Piste de recherche

Read the Jaguar-family Stop() and with_ccx implementations, the RTL8733B override for comparison, and the documented IRadio::ArmChannelBusy contract. Also inspect tests/busy_window_probe.sh and the relevant src/<gen>/CLAUDE.md files; validate the proposed lifecycle and locking changes with the probe, including its revive mode and reps 2..N. Done means the three follow-ups are addressed and the behavior change is measured.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

enhancement

Left open by the busy-window session-lifetime fix (#442, merged as 09eb26a). Closes item 2 of #441.

1. An arm issued AFTER Stop() still succeeds on Jaguar1/2/3

#442 makes Stop() forget a window armed before the teardown. It does not close the other direction: with_ccx on the three Jaguar families gates on _brought_up, which no Stop() clears, so ArmChannelBusy() after a Stop() arms a torn-down chip and the read touches CCX registers on it. The RTL8733B closes this (its Stop() clears _phy_ready under the recursive _reg_mu it holds for the whole body); the Jaguars have neither half. Documented at IRadio::ArmChannelBusy and in each src/<gen>/CLAUDE.md.

Closing it means clearing _brought_up in the Jaguar Stop()s, which gates other paths (the band_change TXAGC re-fold in FastRetune, among others), so it is a behaviour change on its own and wants its own measurement — tests/busy_window_probe.sh --mode revive reps 2..N are exactly the sequence that would start refusing.

2. Jaguar2/3 with_ccx reads _brought_up before taking _reg_mu

Both overrides check the flag unlocked and then take _reg_mu. The RTL8733B override's comment already names the shape: a data race on the flag, and a TOCTOU where the check passes, the lock blocks behind a concurrent Stop(), and the register access proceeds against a card that has just been powered down. Pre-existing; with_ccx is single-control-thread by contract so it is latent, but it costs nothing to read the flag under the lock, and item 1 makes the flag load-bearing.

3. tests/busy_window_probe.sh: stale arm body left indented

#442 removed the tautological if [ "$realtek_sensor" = "1" ] around the stale arm but left its body indented one level. Cosmetic.

Langage dominant
C
Étoiles
56
Forks
29
Merge moyen
3 h 43 min
PR mergées (30 j)
75

Préparer son environnement

Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de OpenIPC/devourer

Toutes les issues de OpenIPC/devourer

Issues similaires

Plus d'issues C

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.