Follow-ups left open by the busy-window session-lifetime fix (#442)
Maintainer thường phản hồi trong vòng 1 ngày
Chưa có ai nhận issue này.
Đánh giá
- Độ khó
- 4/5
- Thời gian dự kiến
- 3-5 ngày
- Mức phù hợp với người mới
- 35/100
- Loại issue
- Lỗi
- Độ rõ ràng
- Đặc tả rõ ràng
- Mức độ hoạt động
- Sôi nổi
- Lĩnh vực
- embedded-iot
Hướng nghiên cứu
Read the Jaguar-family Stop() and with_ccx implementations, the RTL8733B override for comparison, and the documented IRadio::ArmChannelBusy contract. Also inspect tests/busy_window_probe.sh and the relevant src/<gen>/CLAUDE.md files; validate the proposed lifecycle and locking changes with the probe, including its revive mode and reps 2..N. Done means the three follow-ups are addressed and the behavior change is measured.
Do mô hình lập chỉ mục viết ra từ nội dung của issue.
Mô tả
Left open by the busy-window session-lifetime fix (#442, merged as 09eb26a). Closes item 2 of #441.
1. An arm issued AFTER Stop() still succeeds on Jaguar1/2/3
#442 makes Stop() forget a window armed before the teardown. It does not close the other direction: with_ccx on the three Jaguar families gates on _brought_up, which no Stop() clears, so ArmChannelBusy() after a Stop() arms a torn-down chip and the read touches CCX registers on it. The RTL8733B closes this (its Stop() clears _phy_ready under the recursive _reg_mu it holds for the whole body); the Jaguars have neither half. Documented at IRadio::ArmChannelBusy and in each src/<gen>/CLAUDE.md.
Closing it means clearing _brought_up in the Jaguar Stop()s, which gates other paths (the band_change TXAGC re-fold in FastRetune, among others), so it is a behaviour change on its own and wants its own measurement — tests/busy_window_probe.sh --mode revive reps 2..N are exactly the sequence that would start refusing.
2. Jaguar2/3 with_ccx reads _brought_up before taking _reg_mu
Both overrides check the flag unlocked and then take _reg_mu. The RTL8733B override's comment already names the shape: a data race on the flag, and a TOCTOU where the check passes, the lock blocks behind a concurrent Stop(), and the register access proceeds against a card that has just been powered down. Pre-existing; with_ccx is single-control-thread by contract so it is latent, but it costs nothing to read the flag under the lock, and item 1 makes the flag load-bearing.
3. tests/busy_window_probe.sh: stale arm body left indented
#442 removed the tautological if [ "$realtek_sensor" = "1" ] around the stale arm but left its body indented one level. Cosmetic.
- Ngôn ngữ chính
- C
- Star
- 56
- Fork
- 29
- Merge trung bình
- 3 giờ 43 phút
- Pull request đã merge (30 ngày)
- 75
Chuẩn bị môi trường
Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.
Bắt đầu từ đâu
- Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
- Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
- Fork repository và làm thay đổi trên một nhánh.
- Mở pull request có tham chiếu số hiệu của issue.
Issue khác của OpenIPC/devourer
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 82/100
Maintainer thường phản hồi trong vòng 1 ngày
-
Follow-ups left open by the 8822B fast bandwidth toggle fix (#584)Có thể đã có người làm @josephnef đã nhận hôm nay. Đang mởenhancement
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 42/100
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 5/5 Hơn một tuần Mức phù hợp với người mới 12/100
OpenIPC/devourer#579 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
-
enhancement
Độ khó 5/5 Hơn một tuần Mức phù hợp với người mới 12/100
Maintainer thường phản hồi trong vòng 1 ngày
-
enhancement
Độ khó 5/5 Hơn một tuần Mức phù hợp với người mới 8/100
Maintainer thường phản hồi trong vòng 1 ngày
Tất cả issue của OpenIPC/devourer
Issue tương tự
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 72/100
Maintainer thường phản hồi trong vòng 1 ngày
-
Needs-Triage
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 66/100
Maintainer thường phản hồi trong vòng 2 ngày
-
issue: bug report
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 82/100
Maintainer thường phản hồi trong vòng 2 ngày
-
cross-platform fix-now
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 76/100
Maintainer thường phản hồi trong vòng 1 ngày
-
feature:index kind:crash status:confirmed triaged
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 77/100
clice-io/clice#1123 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày