Follow-ups left open by the 8822B fast bandwidth toggle fix (#584)
メンテナーはふだん 1 日以内に返信
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 42/100
- issue の種類
- バグ
- 明瞭さ
- おおむね明確
- 活発さ
- 活発
- 技術スタック
- c
調査の方向性
Start with tests/fast_bw_rxcheck.cpp and compare the 20 MHz to 10 MHz FastSetBandwidth path described here with the full SetMonitorChannel path. Reproduce the intermittent near-zero hit count using the stated RTL8812BU receiver and RTL8812CU transmitter setup. The issue is resolved when the cause is identified and the fast switch reliably decodes the partner during the narrowband window.
索引モデルが issue の本文から書いたものです。
説明
One item left open by #584, which fixes the 8822B fast bandwidth paths but does not touch this.
The fast 20 MHz -> narrowband switch sometimes decodes nothing
tests/fast_bw_rxcheck.cpp on an RTL8812BU (0bda:b812, USB 2, channel 36), with an RTL8812CU (0bda:c812) transmitting 10 MHz narrowband (DEVOURER_NB_BW=10). The RX starts at 20 MHz, toggles to 10 MHz with FastSetBandwidth, and should decode the partner only in that window.
| build | runs with 0 or 1 hits in the narrowband window | healthy runs |
|---|---|---|
master 0761c60c |
1 of 6 | 5 of 6, ~1800 hits each |
| #584 | 4 of 9 | 5 of 9, ~1800 hits each |
Each run is a fresh RX bring-up; the transmitter stayed up across runs. The fast_set_bandwidth 20 -> narrowband branch is identical on the two builds for a toggle without a hop, and the two rates cannot be told apart at these counts, so this is treated as pre-existing.
Not investigated
- Whether the RF18 edge in that branch is itself unreliable, the way the missing edge on the return was (#584 measured 3 of 6 deaf there before adding it).
- Whether the transmitter is at fault. It was a build from 9 November, and a Jaguar3 part; a different narrowband partner would separate the two.
- Whether the full path (
SetMonitorChannelto 10 MHz) shows the same rate. If it does not, the difference between the two paths is the lead. - 5 MHz, and 2.4 GHz.
A run counts as failed here when the narrowband window has at most 1 hit against ~1800 in a healthy run; nothing in between was seen.
- 主要言語
- C
- スター
- 56
- フォーク
- 29
- 平均マージ
- 3時間 43分
- マージ済み PR(30日)
- 75
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
OpenIPC/devourer のほかの issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
メンテナーはふだん 1 日以内に返信
-
難易度 5/5 1週間以上 初心者へのやさしさ 12/100
OpenIPC/devourer#579 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
enhancement
難易度 5/5 1週間以上 初心者へのやさしさ 12/100
メンテナーはふだん 1 日以内に返信
-
enhancement
難易度 5/5 1週間以上 初心者へのやさしさ 8/100
メンテナーはふだん 1 日以内に返信
-
M6 test realism — a moving-UE handover bench (conducted path-loss matrix, then an over-the-air walk)オープンenhancement
難易度 5/5 1週間以上 初心者へのやさしさ 25/100
OpenIPC/devourer#563 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
OpenIPC/devourer の issue をすべて見る
似ている issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
メンテナーはふだん 1 日以内に返信
-
Needs-Triage
難易度 2/5 1〜3時間 初心者へのやさしさ 66/100
メンテナーはふだん 2 日以内に返信
-
issue: bug report
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
メンテナーはふだん 2 日以内に返信
-
cross-platform fix-now
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
メンテナーはふだん 1 日以内に返信
-
feature:index kind:crash status:confirmed triaged
難易度 2/5 1〜3時間 初心者へのやさしさ 77/100
clice-io/clice#1123 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信