Follow-ups left open by the busy-window session-lifetime fix (#442)
I maintainer di solito rispondono entro 1 giorno
Nessuno ha ancora preso questa issue.
Valutazione
- Difficoltà
- 4/5
- Tempo stimato
- 3-5 giorni
- Idoneità per principianti
- 35/100
- Tipo di issue
- Bug
- Chiarezza
- Specificata chiaramente
- Stato di attività
- Attiva
- Ambito
- embedded-iot
Direzione di ricerca
Read the Jaguar-family Stop() and with_ccx implementations, the RTL8733B override for comparison, and the documented IRadio::ArmChannelBusy contract. Also inspect tests/busy_window_probe.sh and the relevant src/<gen>/CLAUDE.md files; validate the proposed lifecycle and locking changes with the probe, including its revive mode and reps 2..N. Done means the three follow-ups are addressed and the behavior change is measured.
Scritto dal modello di indicizzazione a partire dal testo della issue.
Descrizione
Left open by the busy-window session-lifetime fix (#442, merged as 09eb26a). Closes item 2 of #441.
1. An arm issued AFTER Stop() still succeeds on Jaguar1/2/3
#442 makes Stop() forget a window armed before the teardown. It does not close the other direction: with_ccx on the three Jaguar families gates on _brought_up, which no Stop() clears, so ArmChannelBusy() after a Stop() arms a torn-down chip and the read touches CCX registers on it. The RTL8733B closes this (its Stop() clears _phy_ready under the recursive _reg_mu it holds for the whole body); the Jaguars have neither half. Documented at IRadio::ArmChannelBusy and in each src/<gen>/CLAUDE.md.
Closing it means clearing _brought_up in the Jaguar Stop()s, which gates other paths (the band_change TXAGC re-fold in FastRetune, among others), so it is a behaviour change on its own and wants its own measurement — tests/busy_window_probe.sh --mode revive reps 2..N are exactly the sequence that would start refusing.
2. Jaguar2/3 with_ccx reads _brought_up before taking _reg_mu
Both overrides check the flag unlocked and then take _reg_mu. The RTL8733B override's comment already names the shape: a data race on the flag, and a TOCTOU where the check passes, the lock blocks behind a concurrent Stop(), and the register access proceeds against a card that has just been powered down. Pre-existing; with_ccx is single-control-thread by contract so it is latent, but it costs nothing to read the flag under the lock, and item 1 makes the flag load-bearing.
3. tests/busy_window_probe.sh: stale arm body left indented
#442 removed the tautological if [ "$realtek_sensor" = "1" ] around the stale arm but left its body indented one level. Cosmetic.
- Lingua principale
- C
- Stelle
- 56
- Fork
- 29
- Merge medio
- 3h 43m
- PR unite (30g)
- 75
Preparare l'ambiente
Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.
Come iniziare
- Leggi tutta la issue e poi la guida ai contributi del progetto.
- Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
- Fai un fork del repository e lavora su un branch.
- Apri una pull request che faccia riferimento al numero della issue.
Altre issue di OpenIPC/devourer
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 82/100
I maintainer di solito rispondono entro 1 giorno
-
Follow-ups left open by the 8822B fast bandwidth toggle fix (#584)Forse già presa @josephnef l’ha presa oggi. Apertaenhancement
Difficoltà 4/5 3-5 giorni Idoneità per principianti 42/100
I maintainer di solito rispondono entro 1 giorno
-
Difficoltà 5/5 Più di una settimana Idoneità per principianti 12/100
OpenIPC/devourer#579 · 1 commento ·
I maintainer di solito rispondono entro 1 giorno
-
enhancement
Difficoltà 5/5 Più di una settimana Idoneità per principianti 12/100
I maintainer di solito rispondono entro 1 giorno
-
enhancement
Difficoltà 5/5 Più di una settimana Idoneità per principianti 8/100
I maintainer di solito rispondono entro 1 giorno
Tutte le issue di OpenIPC/devourer
Issue simili
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 72/100
I maintainer di solito rispondono entro 1 giorno
-
Needs-Triage
Difficoltà 2/5 1-3 ore Idoneità per principianti 66/100
I maintainer di solito rispondono entro 2 giorni
-
issue: bug report
Difficoltà 2/5 1-3 ore Idoneità per principianti 82/100
I maintainer di solito rispondono entro 2 giorni
-
cross-platform fix-now
Difficoltà 2/5 1-3 ore Idoneità per principianti 76/100
I maintainer di solito rispondono entro 1 giorno
-
feature:index kind:crash status:confirmed triaged
Difficoltà 2/5 1-3 ore Idoneità per principianti 77/100
clice-io/clice#1123 · 1 commento ·
I maintainer di solito rispondono entro 1 giorno