Follow-ups left open by the busy-window session-lifetime fix (#442)
Los mantenedores suelen responder en 1 día
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 4/5
- Tiempo estimado
- 3-5 días
- Aptitud para principiantes
- 35/100
- Tipo de issue
- Error
- Claridad
- Bien especificado
- Estado de actividad
- Activo
- Área
- embedded-iot
Línea de trabajo
Read the Jaguar-family Stop() and with_ccx implementations, the RTL8733B override for comparison, and the documented IRadio::ArmChannelBusy contract. Also inspect tests/busy_window_probe.sh and the relevant src/<gen>/CLAUDE.md files; validate the proposed lifecycle and locking changes with the probe, including its revive mode and reps 2..N. Done means the three follow-ups are addressed and the behavior change is measured.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Left open by the busy-window session-lifetime fix (#442, merged as 09eb26a). Closes item 2 of #441.
1. An arm issued AFTER Stop() still succeeds on Jaguar1/2/3
#442 makes Stop() forget a window armed before the teardown. It does not close the other direction: with_ccx on the three Jaguar families gates on _brought_up, which no Stop() clears, so ArmChannelBusy() after a Stop() arms a torn-down chip and the read touches CCX registers on it. The RTL8733B closes this (its Stop() clears _phy_ready under the recursive _reg_mu it holds for the whole body); the Jaguars have neither half. Documented at IRadio::ArmChannelBusy and in each src/<gen>/CLAUDE.md.
Closing it means clearing _brought_up in the Jaguar Stop()s, which gates other paths (the band_change TXAGC re-fold in FastRetune, among others), so it is a behaviour change on its own and wants its own measurement — tests/busy_window_probe.sh --mode revive reps 2..N are exactly the sequence that would start refusing.
2. Jaguar2/3 with_ccx reads _brought_up before taking _reg_mu
Both overrides check the flag unlocked and then take _reg_mu. The RTL8733B override's comment already names the shape: a data race on the flag, and a TOCTOU where the check passes, the lock blocks behind a concurrent Stop(), and the register access proceeds against a card that has just been powered down. Pre-existing; with_ccx is single-control-thread by contract so it is latent, but it costs nothing to read the flag under the lock, and item 1 makes the flag load-bearing.
3. tests/busy_window_probe.sh: stale arm body left indented
#442 removed the tautological if [ "$realtek_sensor" = "1" ] around the stale arm but left its body indented one level. Cosmetic.
- Lenguaje dominante
- C
- Estrellas
- 56
- Forks
- 29
- Merge medio
- 3 h 43 min
- PR fusionados (30 d)
- 75
Preparar el entorno
Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de OpenIPC/devourer
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 82/100
Los mantenedores suelen responder en 1 día
-
Follow-ups left open by the 8822B fast bandwidth toggle fix (#584)Posiblemente ocupada @josephnef la tomó hoy. Abiertoenhancement
Dificultad 4/5 3-5 días Aptitud para principiantes 42/100
Los mantenedores suelen responder en 1 día
-
Dificultad 5/5 Más de una semana Aptitud para principiantes 12/100
OpenIPC/devourer#579 · 1 comentario ·
Los mantenedores suelen responder en 1 día
-
enhancement
Dificultad 5/5 Más de una semana Aptitud para principiantes 12/100
Los mantenedores suelen responder en 1 día
-
enhancement
Dificultad 5/5 Más de una semana Aptitud para principiantes 8/100
Los mantenedores suelen responder en 1 día
Todos los issues de OpenIPC/devourer
Issues similares
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
Los mantenedores suelen responder en 1 día
-
Needs-Triage
Dificultad 2/5 1-3 horas Aptitud para principiantes 66/100
Los mantenedores suelen responder en 2 días
-
issue: bug report
Dificultad 2/5 1-3 horas Aptitud para principiantes 82/100
Los mantenedores suelen responder en 2 días
-
cross-platform fix-now
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
Los mantenedores suelen responder en 1 día
-
feature:index kind:crash status:confirmed triaged
Dificultad 2/5 1-3 horas Aptitud para principiantes 77/100
clice-io/clice#1123 · 1 comentario ·
Los mantenedores suelen responder en 1 día