GA36-MB V1.2-20260416 (Unknown Hardware Variant)

Offen
#150 7 Kommentare 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
4/5
Geschätzter Aufwand
3-5 Tage
Anfängerfreundlichkeit
48/100
Issue-Typ
Bug
Klarheit
Größtenteils klar
Aktivitätsstatus
Aktiv
Tech-Stack
cpp
Bereich
embedded-iot

Rechercherichtung

Start by examining the attached stock script.bin and the firmware builder’s hardware variant detection, then compare this board’s data with the similar issues mentioned in the report. Confirm what information or commands are needed from the reporter, who has offered to provide the boot partition and test builds. Done means the builder recognizes the GA36-MB V1.2 variant; the reported stock freezes may require separate investigation.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

Board: GA36-MB V1.2
Board date: 20260416
Status: Unsupported device (Firmware Builder reports “Unknown Hardware Variant”)
script.bin size: 35008 bytes
SHA-256: e54e6ff5ffeedb4e488a2558d82775a1da2f8c8e851dea2703e5097dcd037e23
Stock script.bin: attached (script-e54e6ff5ffee.zip)

Details:

  • Bought from Temu as an “R36MAX” in late October 2026.
  • Stock OS is EmuELEC 4.7, system ID GA36C-UDT-EE-TF-R-20260520.
  • The stock card’s boot sectors contain PHOENIX_CARD_IMG and eGON.BT0.
  • Panel variant: unknown.
  • I have a full, hash-verified raw dd image of the working stock card (about 5GB) and can provide the boot partition or run any commands you need. Also happy to provide the entire image.
  • Symptom on stock firmware: random video and audio freezes, on both the original card and a clone, with and without the charger.
  • Board and teardown photos attached.

I’m happy to test builds on this unit.

I do see that there are other similar issues and the only reason I'm submitting this one is because the firmware builder was unable to recognize the provided image.

script.bin.zip

goodluckOS-Board-Teardown-photos.zip

Vorherrschende Sprache
C++
Sterne
54
Forks
8
Ø Merge
16 T. 19 Std.
Gemergte PRs (30 T.)
4

Entwicklungsumgebung

Dieses Projekt bietet weder Dev-Container noch Dockerfile noch Beitragsleitfaden – die Einrichtung liegt bei Ihnen. Beginnen Sie mit der README; die allgemeinen Schritte stehen in unserem Leitfaden für den ersten Beitrag.

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus CodeZombie/goodluckOS

Alle Issues in CodeZombie/goodluckOS

Ähnliche Issues

Weitere Issues zu C++

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.