GA36-MB V1.2-20260416 (Unknown Hardware Variant)

Aberta
#150 7 comentários 0 reações 0 responsáveis Ver no GitHub

Ninguém assumiu esta issue ainda.

Avaliação

Dificuldade
4/5
Tempo estimado
3-5 dias
Facilidade para iniciantes
48/100
Tipo de issue
Bug
Clareza
Razoavelmente clara
Status de atividade
Ativa
Stack de tecnologia
cpp
Domínio
embedded-iot

Direção de pesquisa

Start by examining the attached stock script.bin and the firmware builder’s hardware variant detection, then compare this board’s data with the similar issues mentioned in the report. Confirm what information or commands are needed from the reporter, who has offered to provide the boot partition and test builds. Done means the builder recognizes the GA36-MB V1.2 variant; the reported stock freezes may require separate investigation.

Escrita pelo modelo de indexação a partir do texto da issue.

Descrição

Board: GA36-MB V1.2
Board date: 20260416
Status: Unsupported device (Firmware Builder reports “Unknown Hardware Variant”)
script.bin size: 35008 bytes
SHA-256: e54e6ff5ffeedb4e488a2558d82775a1da2f8c8e851dea2703e5097dcd037e23
Stock script.bin: attached (script-e54e6ff5ffee.zip)

Details:

  • Bought from Temu as an “R36MAX” in late October 2026.
  • Stock OS is EmuELEC 4.7, system ID GA36C-UDT-EE-TF-R-20260520.
  • The stock card’s boot sectors contain PHOENIX_CARD_IMG and eGON.BT0.
  • Panel variant: unknown.
  • I have a full, hash-verified raw dd image of the working stock card (about 5GB) and can provide the boot partition or run any commands you need. Also happy to provide the entire image.
  • Symptom on stock firmware: random video and audio freezes, on both the original card and a clone, with and without the charger.
  • Board and teardown photos attached.

I’m happy to test builds on this unit.

I do see that there are other similar issues and the only reason I'm submitting this one is because the firmware builder was unable to recognize the provided image.

script.bin.zip

goodluckOS-Board-Teardown-photos.zip

Linguagem predominante
C++
Estrelas
54
Forks
8
Merge médio
16d 19h
PRs com merge (30d)
4

Preparar o ambiente

Este projeto não oferece contêiner de desenvolvimento, Dockerfile nem guia de contribuição, então a configuração fica por sua conta: comece pelo README e veja nosso guia da primeira contribuição para os passos gerais.

Primeiros passos

  1. Leia a issue inteira e depois o guia de contribuição do projeto.
  2. Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
  3. Faça um fork do repositório e trabalhe em uma branch.
  4. Abra um pull request que referencie o número da issue.

Mais de CodeZombie/goodluckOS

Todas as issues de CodeZombie/goodluckOS

Issues semelhantes

Mais issues de C++

Receba novas issues na sua caixa de entrada

Um resumo curto de issues do GitHub para quem está começando.