GA36-MB V1.2-20260416 (Unknown Hardware Variant)

Aperta
#150 7 commenti 0 reazioni 0 assegnatari Vedi su GitHub

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
4/5
Tempo stimato
3-5 giorni
Idoneità per principianti
48/100
Tipo di issue
Bug
Chiarezza
Abbastanza chiara
Stato di attività
Attiva
Stack tecnologico
cpp
Ambito
embedded-iot

Direzione di ricerca

Start by examining the attached stock script.bin and the firmware builder’s hardware variant detection, then compare this board’s data with the similar issues mentioned in the report. Confirm what information or commands are needed from the reporter, who has offered to provide the boot partition and test builds. Done means the builder recognizes the GA36-MB V1.2 variant; the reported stock freezes may require separate investigation.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

Board: GA36-MB V1.2
Board date: 20260416
Status: Unsupported device (Firmware Builder reports “Unknown Hardware Variant”)
script.bin size: 35008 bytes
SHA-256: e54e6ff5ffeedb4e488a2558d82775a1da2f8c8e851dea2703e5097dcd037e23
Stock script.bin: attached (script-e54e6ff5ffee.zip)

Details:

  • Bought from Temu as an “R36MAX” in late October 2026.
  • Stock OS is EmuELEC 4.7, system ID GA36C-UDT-EE-TF-R-20260520.
  • The stock card’s boot sectors contain PHOENIX_CARD_IMG and eGON.BT0.
  • Panel variant: unknown.
  • I have a full, hash-verified raw dd image of the working stock card (about 5GB) and can provide the boot partition or run any commands you need. Also happy to provide the entire image.
  • Symptom on stock firmware: random video and audio freezes, on both the original card and a clone, with and without the charger.
  • Board and teardown photos attached.

I’m happy to test builds on this unit.

I do see that there are other similar issues and the only reason I'm submitting this one is because the firmware builder was unable to recognize the provided image.

script.bin.zip

goodluckOS-Board-Teardown-photos.zip

Lingua principale
C++
Stelle
54
Fork
8
Merge medio
16g 19h
PR unite (30g)
4

Preparare l'ambiente

Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di CodeZombie/goodluckOS

Tutte le issue di CodeZombie/goodluckOS

Issue simili

Altre issue su C++

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.