GA36-MB V1.2-20260416 (Unknown Hardware Variant)

Đang mở
#150 7 bình luận 0 reaction 0 người được giao Xem trên GitHub

Chưa có ai nhận issue này.

Đánh giá

Độ khó
4/5
Thời gian dự kiến
3-5 ngày
Mức phù hợp với người mới
48/100
Loại issue
Lỗi
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
cpp
Lĩnh vực
embedded-iot

Hướng nghiên cứu

Start by examining the attached stock script.bin and the firmware builder’s hardware variant detection, then compare this board’s data with the similar issues mentioned in the report. Confirm what information or commands are needed from the reporter, who has offered to provide the boot partition and test builds. Done means the builder recognizes the GA36-MB V1.2 variant; the reported stock freezes may require separate investigation.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

Board: GA36-MB V1.2
Board date: 20260416
Status: Unsupported device (Firmware Builder reports “Unknown Hardware Variant”)
script.bin size: 35008 bytes
SHA-256: e54e6ff5ffeedb4e488a2558d82775a1da2f8c8e851dea2703e5097dcd037e23
Stock script.bin: attached (script-e54e6ff5ffee.zip)

Details:

  • Bought from Temu as an “R36MAX” in late October 2026.
  • Stock OS is EmuELEC 4.7, system ID GA36C-UDT-EE-TF-R-20260520.
  • The stock card’s boot sectors contain PHOENIX_CARD_IMG and eGON.BT0.
  • Panel variant: unknown.
  • I have a full, hash-verified raw dd image of the working stock card (about 5GB) and can provide the boot partition or run any commands you need. Also happy to provide the entire image.
  • Symptom on stock firmware: random video and audio freezes, on both the original card and a clone, with and without the charger.
  • Board and teardown photos attached.

I’m happy to test builds on this unit.

I do see that there are other similar issues and the only reason I'm submitting this one is because the firmware builder was unable to recognize the provided image.

script.bin.zip

goodluckOS-Board-Teardown-photos.zip

Ngôn ngữ chính
C++
Star
54
Fork
8
Merge trung bình
16 ngày 19 giờ
Pull request đã merge (30 ngày)
4

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của CodeZombie/goodluckOS

Tất cả issue của CodeZombie/goodluckOS

Issue tương tự

Thêm issue về C++

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.