GA36-MB V1.2-20260416 (Unknown Hardware Variant)

Ouverte
#150 7 commentaires 0 réactions 0 personnes assignées Voir sur GitHub

Personne n'a encore pris cette issue.

Évaluation

Difficulté
4/5
Temps estimé
3-5 jours
Accessibilité débutants
48/100
Type d'issue
Bug
Clarté
Plutôt claire
Activité
Active
Stack technique
cpp
Domaine
embedded-iot

Piste de recherche

Start by examining the attached stock script.bin and the firmware builder’s hardware variant detection, then compare this board’s data with the similar issues mentioned in the report. Confirm what information or commands are needed from the reporter, who has offered to provide the boot partition and test builds. Done means the builder recognizes the GA36-MB V1.2 variant; the reported stock freezes may require separate investigation.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

Board: GA36-MB V1.2
Board date: 20260416
Status: Unsupported device (Firmware Builder reports “Unknown Hardware Variant”)
script.bin size: 35008 bytes
SHA-256: e54e6ff5ffeedb4e488a2558d82775a1da2f8c8e851dea2703e5097dcd037e23
Stock script.bin: attached (script-e54e6ff5ffee.zip)

Details:

  • Bought from Temu as an “R36MAX” in late October 2026.
  • Stock OS is EmuELEC 4.7, system ID GA36C-UDT-EE-TF-R-20260520.
  • The stock card’s boot sectors contain PHOENIX_CARD_IMG and eGON.BT0.
  • Panel variant: unknown.
  • I have a full, hash-verified raw dd image of the working stock card (about 5GB) and can provide the boot partition or run any commands you need. Also happy to provide the entire image.
  • Symptom on stock firmware: random video and audio freezes, on both the original card and a clone, with and without the charger.
  • Board and teardown photos attached.

I’m happy to test builds on this unit.

I do see that there are other similar issues and the only reason I'm submitting this one is because the firmware builder was unable to recognize the provided image.

script.bin.zip

goodluckOS-Board-Teardown-photos.zip

Langage dominant
C++
Étoiles
54
Forks
8
Merge moyen
16 j 19 h
PR mergées (30 j)
4

Préparer son environnement

Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de CodeZombie/goodluckOS

Toutes les issues de CodeZombie/goodluckOS

Issues similaires

Plus d'issues C++

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.