Mobile robot loses balance when arms are moving
還沒有人認領這個 Issue。
評估
研究方向
Start with the URDF Importer articulation body setup and reproduce the two-arm movement using the stated masses, stiffness, damping, and force-limit values. The issue names no source files or tests, and its acceptance criteria need maintainer clarification beyond preventing the body from falling or shaking.
由索引模型根據 Issue 內容生成。
描述
Describe the bug
I have been running into some issues trying to simulate joint movement in our mobile robot, built with the URDF importer. I am moving the robot by changing the target parameter in the articulation body component leaving target velocity permanently as 0. As I use the values recommended for stiffness, damping and force limit with the REAL MASSES of the parts(each arm is a total 4.5 kg, body 65 kg and wheels 1 kg) the result is that the robot falls on its face when lifting both arms upwards. Increasing stiffness makes the joints more firm but increases the force on the robot body on the other hand increasing damping makes the joint weak to the pull of gravity to a point where they refuse to respond at all. A compromise I found was to increase the mass of either the wheels, the body or a combination of the two significantly which in turn hurts the accuracy(which is a big focus for us) and makes the robot jitters slightly in so creating an effect of the world shaking and lastly sudden movements still rattle the robot. I have been trying to find a sweet spot where the world doesn't shake, the joints are not "limp" and the robot doesn't fall to the ground from basic movement and have been falling short of reaching this goal. Any advice would be greatly appreciated. Trying to remove wheels or create collision really small to make sure they dont interfere with each other has no yielded any positive results.
To Reproduce
- Create a simple robot URDF with just a body and two arms with two links each
- make the body mass 65 and arms 4.5
- make the second joint of the arm lift the arm upwards
- lift both arms up at the same time
Expected behavior
I expected the arm to rise while the body stay completely still, as the real robot behaves.
Screenshots
(https://user-images.githubusercontent.com/99715242/167649738-3c8a6d73-3c14-4f1e-8708-648f00f11c21.mp4)
Environment (please complete the following information, where applicable):
- Unity Version: Unity 2020.3.30f1
- Unity machine OS + version: Ubuntu 20.04
- ROS machine OS + version: Ubuntu 20.04, ROS Galactic
- ROS–Unity communication: no docker
- Branch or version: Ros Tcp Connector v:0.7.0, URDF Importer v:0.5.0
- 主要語言
- C#
- 星號
- 2.6k
- 分支
- 473
- PR 合併指標
- 30 天內沒有已合併 PR
環境準備
- 沒有 Dockerfile 或 Docker Compose 檔案
- 有 Pull Request 範本
- 沒有貢獻指南
從這裡開始
- 先讀完整個 Issue,再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫,在一個分支上完成修改。
- 送出 Pull Request,並在描述裡引用這個 Issue 編號。
Unity-Technologies/Unity-Robotics-Hub 的其他 Issue
-
難度 3/5 1-2 天 新手友好度 35/100
-
ROS2,Action未關閉
難度 4/5 3-5 天 新手友好度 25/100
-
難度 1/5 1 小時以內 新手友好度 20/100
-
難度 5/5 一週以上 新手友好度 15/100
-
難度 4/5 3-5 天 新手友好度 25/100
Unity-Technologies/Unity-Robotics-Hub#433 · 1 則留言 ·
查看 Unity-Technologies/Unity-Robotics-Hub 的全部 Issue
相似的 Issue
-
bug
難度 2/5 1-3 小時 新手友好度 72/100
維護者通常 3 天內回覆
-
bug python
難度 1/5 1 小時以內 新手友好度 88/100
ilia-sokolov/OfficeAgent.NET#89 ·
維護者通常 13 天內回覆
-
documentation
難度 2/5 1-3 小時 新手友好度 82/100
juandresrodca/AdminForge#66 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 70/100
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 72/100
umbraco/Umbraco.Automate#612 ·
維護者通常 1 天內回覆