Mobile robot loses balance when arms are moving
Nessuno ha ancora preso questa issue.
Valutazione
- Difficoltà
- 5/5
- Tempo stimato
- Più di una settimana
- Idoneità per principianti
- 25/100
Direzione di ricerca
Start with the URDF Importer articulation body setup and reproduce the two-arm movement using the stated masses, stiffness, damping, and force-limit values. The issue names no source files or tests, and its acceptance criteria need maintainer clarification beyond preventing the body from falling or shaking.
Scritto dal modello di indicizzazione a partire dal testo della issue.
Descrizione
Describe the bug
I have been running into some issues trying to simulate joint movement in our mobile robot, built with the URDF importer. I am moving the robot by changing the target parameter in the articulation body component leaving target velocity permanently as 0. As I use the values recommended for stiffness, damping and force limit with the REAL MASSES of the parts(each arm is a total 4.5 kg, body 65 kg and wheels 1 kg) the result is that the robot falls on its face when lifting both arms upwards. Increasing stiffness makes the joints more firm but increases the force on the robot body on the other hand increasing damping makes the joint weak to the pull of gravity to a point where they refuse to respond at all. A compromise I found was to increase the mass of either the wheels, the body or a combination of the two significantly which in turn hurts the accuracy(which is a big focus for us) and makes the robot jitters slightly in so creating an effect of the world shaking and lastly sudden movements still rattle the robot. I have been trying to find a sweet spot where the world doesn't shake, the joints are not "limp" and the robot doesn't fall to the ground from basic movement and have been falling short of reaching this goal. Any advice would be greatly appreciated. Trying to remove wheels or create collision really small to make sure they dont interfere with each other has no yielded any positive results.
To Reproduce
- Create a simple robot URDF with just a body and two arms with two links each
- make the body mass 65 and arms 4.5
- make the second joint of the arm lift the arm upwards
- lift both arms up at the same time
Expected behavior
I expected the arm to rise while the body stay completely still, as the real robot behaves.
Screenshots
(https://user-images.githubusercontent.com/99715242/167649738-3c8a6d73-3c14-4f1e-8708-648f00f11c21.mp4)
Environment (please complete the following information, where applicable):
- Unity Version: Unity 2020.3.30f1
- Unity machine OS + version: Ubuntu 20.04
- ROS machine OS + version: Ubuntu 20.04, ROS Galactic
- ROS–Unity communication: no docker
- Branch or version: Ros Tcp Connector v:0.7.0, URDF Importer v:0.5.0
- Lingua principale
- C#
- Stelle
- 2.6k
- Fork
- 473
- Metriche di merge delle PR
- Nessuna PR unita negli ultimi 30g
Preparare l'ambiente
- Nessun Dockerfile né file Docker Compose
- Ha un modello di pull request
- Nessuna guida per i contributori
Come iniziare
- Leggi tutta la issue e poi la guida ai contributi del progetto.
- Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
- Fai un fork del repository e lavora su un branch.
- Apri una pull request che faccia riferimento al numero della issue.
Altre issue di Unity-Technologies/Unity-Robotics-Hub
-
Difficoltà 3/5 1-2 giorni Idoneità per principianti 35/100
-
ROS2,ActionAperta
Difficoltà 4/5 3-5 giorni Idoneità per principianti 25/100
-
Is the project deprecated?Aperta
Difficoltà 1/5 Meno di un'ora Idoneità per principianti 20/100
-
Force/Torque sensorAperta
Difficoltà 5/5 Più di una settimana Idoneità per principianti 15/100
-
Difficoltà 4/5 3-5 giorni Idoneità per principianti 25/100
Unity-Technologies/Unity-Robotics-Hub#433 · 1 commento ·
Tutte le issue di Unity-Technologies/Unity-Robotics-Hub
Issue simili
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 72/100
umbraco/Umbraco.Automate#612 ·
I maintainer di solito rispondono entro 1 giorno
-
崩溃日志只按 CRLF 分行Aperta
Difficoltà 2/5 1-3 ore Idoneità per principianti 72/100
PCL-Community/PCL-CE#3872 ·
I maintainer di solito rispondono entro 1 giorno
-
type:task ux
Difficoltà 2/5 1-3 ore Idoneità per principianti 72/100
elsa-workflows/elsa-foundation#5253 ·
I maintainer di solito rispondono entro 1 giorno