Mobile robot loses balance when arms are moving
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 5/5
- Tiempo estimado
- Más de una semana
- Aptitud para principiantes
- 25/100
Línea de trabajo
Start with the URDF Importer articulation body setup and reproduce the two-arm movement using the stated masses, stiffness, damping, and force-limit values. The issue names no source files or tests, and its acceptance criteria need maintainer clarification beyond preventing the body from falling or shaking.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Describe the bug
I have been running into some issues trying to simulate joint movement in our mobile robot, built with the URDF importer. I am moving the robot by changing the target parameter in the articulation body component leaving target velocity permanently as 0. As I use the values recommended for stiffness, damping and force limit with the REAL MASSES of the parts(each arm is a total 4.5 kg, body 65 kg and wheels 1 kg) the result is that the robot falls on its face when lifting both arms upwards. Increasing stiffness makes the joints more firm but increases the force on the robot body on the other hand increasing damping makes the joint weak to the pull of gravity to a point where they refuse to respond at all. A compromise I found was to increase the mass of either the wheels, the body or a combination of the two significantly which in turn hurts the accuracy(which is a big focus for us) and makes the robot jitters slightly in so creating an effect of the world shaking and lastly sudden movements still rattle the robot. I have been trying to find a sweet spot where the world doesn't shake, the joints are not "limp" and the robot doesn't fall to the ground from basic movement and have been falling short of reaching this goal. Any advice would be greatly appreciated. Trying to remove wheels or create collision really small to make sure they dont interfere with each other has no yielded any positive results.
To Reproduce
- Create a simple robot URDF with just a body and two arms with two links each
- make the body mass 65 and arms 4.5
- make the second joint of the arm lift the arm upwards
- lift both arms up at the same time
Expected behavior
I expected the arm to rise while the body stay completely still, as the real robot behaves.
Screenshots
(https://user-images.githubusercontent.com/99715242/167649738-3c8a6d73-3c14-4f1e-8708-648f00f11c21.mp4)
Environment (please complete the following information, where applicable):
- Unity Version: Unity 2020.3.30f1
- Unity machine OS + version: Ubuntu 20.04
- ROS machine OS + version: Ubuntu 20.04, ROS Galactic
- ROS–Unity communication: no docker
- Branch or version: Ros Tcp Connector v:0.7.0, URDF Importer v:0.5.0
- Lenguaje dominante
- C#
- Estrellas
- 2.6k
- Forks
- 473
- Métricas de merge de PR
- Sin PR fusionados en 30 d
Preparar el entorno
- Sin Dockerfile ni archivo de Docker Compose
- Tiene una plantilla de pull request
- Sin guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de Unity-Technologies/Unity-Robotics-Hub
-
Dificultad 3/5 1-2 días Aptitud para principiantes 35/100
-
ROS2,ActionAbierto
Dificultad 4/5 3-5 días Aptitud para principiantes 25/100
-
Is the project deprecated?Abierto
Dificultad 1/5 Menos de una hora Aptitud para principiantes 20/100
-
Force/Torque sensorAbierto
Dificultad 5/5 Más de una semana Aptitud para principiantes 15/100
-
Dificultad 4/5 3-5 días Aptitud para principiantes 25/100
Unity-Technologies/Unity-Robotics-Hub#433 · 1 comentario ·
Todos los issues de Unity-Technologies/Unity-Robotics-Hub
Issues similares
-
DXF with empty names failsAbiertobug
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
Los mantenedores suelen responder en 3 días
-
bug python
Dificultad 1/5 Menos de una hora Aptitud para principiantes 88/100
ilia-sokolov/OfficeAgent.NET#89 ·
Los mantenedores suelen responder en 13 días
-
documentation
Dificultad 2/5 1-3 horas Aptitud para principiantes 82/100
juandresrodca/AdminForge#66 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 70/100
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
umbraco/Umbraco.Automate#612 ·
Los mantenedores suelen responder en 1 día