Mobile robot loses balance when arms are moving
Ninguém assumiu esta issue ainda.
Avaliação
- Dificuldade
- 5/5
- Tempo estimado
- Mais de uma semana
- Facilidade para iniciantes
- 25/100
Direção de pesquisa
Start with the URDF Importer articulation body setup and reproduce the two-arm movement using the stated masses, stiffness, damping, and force-limit values. The issue names no source files or tests, and its acceptance criteria need maintainer clarification beyond preventing the body from falling or shaking.
Escrita pelo modelo de indexação a partir do texto da issue.
Descrição
Describe the bug
I have been running into some issues trying to simulate joint movement in our mobile robot, built with the URDF importer. I am moving the robot by changing the target parameter in the articulation body component leaving target velocity permanently as 0. As I use the values recommended for stiffness, damping and force limit with the REAL MASSES of the parts(each arm is a total 4.5 kg, body 65 kg and wheels 1 kg) the result is that the robot falls on its face when lifting both arms upwards. Increasing stiffness makes the joints more firm but increases the force on the robot body on the other hand increasing damping makes the joint weak to the pull of gravity to a point where they refuse to respond at all. A compromise I found was to increase the mass of either the wheels, the body or a combination of the two significantly which in turn hurts the accuracy(which is a big focus for us) and makes the robot jitters slightly in so creating an effect of the world shaking and lastly sudden movements still rattle the robot. I have been trying to find a sweet spot where the world doesn't shake, the joints are not "limp" and the robot doesn't fall to the ground from basic movement and have been falling short of reaching this goal. Any advice would be greatly appreciated. Trying to remove wheels or create collision really small to make sure they dont interfere with each other has no yielded any positive results.
To Reproduce
- Create a simple robot URDF with just a body and two arms with two links each
- make the body mass 65 and arms 4.5
- make the second joint of the arm lift the arm upwards
- lift both arms up at the same time
Expected behavior
I expected the arm to rise while the body stay completely still, as the real robot behaves.
Screenshots
(https://user-images.githubusercontent.com/99715242/167649738-3c8a6d73-3c14-4f1e-8708-648f00f11c21.mp4)
Environment (please complete the following information, where applicable):
- Unity Version: Unity 2020.3.30f1
- Unity machine OS + version: Ubuntu 20.04
- ROS machine OS + version: Ubuntu 20.04, ROS Galactic
- ROS–Unity communication: no docker
- Branch or version: Ros Tcp Connector v:0.7.0, URDF Importer v:0.5.0
- Linguagem predominante
- C#
- Estrelas
- 2.6k
- Forks
- 473
- Métricas de merge de PRs
- Nenhum PR com merge em 30d
Preparar o ambiente
- Sem Dockerfile nem arquivo Docker Compose
- Tem um modelo de pull request
- Sem guia de contribuição
Primeiros passos
- Leia a issue inteira e depois o guia de contribuição do projeto.
- Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
- Faça um fork do repositório e trabalhe em uma branch.
- Abra um pull request que referencie o número da issue.
Mais de Unity-Technologies/Unity-Robotics-Hub
-
Dificuldade 3/5 1-2 dias Facilidade para iniciantes 35/100
-
ROS2,ActionAberta
Dificuldade 4/5 3-5 dias Facilidade para iniciantes 25/100
-
Is the project deprecated?Aberta
Dificuldade 1/5 Menos de uma hora Facilidade para iniciantes 20/100
-
Force/Torque sensorAberta
Dificuldade 5/5 Mais de uma semana Facilidade para iniciantes 15/100
-
Dificuldade 4/5 3-5 dias Facilidade para iniciantes 25/100
Unity-Technologies/Unity-Robotics-Hub#433 · 1 comentário ·
Todas as issues de Unity-Technologies/Unity-Robotics-Hub
Issues semelhantes
-
DXF with empty names failsAbertabug
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 72/100
Mantenedores costumam responder em até 3 dias
-
bug python
Dificuldade 1/5 Menos de uma hora Facilidade para iniciantes 88/100
ilia-sokolov/OfficeAgent.NET#89 ·
Mantenedores costumam responder em até 13 dias
-
documentation
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 82/100
juandresrodca/AdminForge#66 ·
Mantenedores costumam responder em até 1 dia
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 70/100
Mantenedores costumam responder em até 1 dia
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 72/100
umbraco/Umbraco.Automate#612 ·
Mantenedores costumam responder em até 1 dia