Mobile robot loses balance when arms are moving
まだ誰も着手していません。
評価
- 難易度
- 5/5
- 見積もり時間
- 1週間以上
- 初心者へのやさしさ
- 25/100
調査の方向性
Start with the URDF Importer articulation body setup and reproduce the two-arm movement using the stated masses, stiffness, damping, and force-limit values. The issue names no source files or tests, and its acceptance criteria need maintainer clarification beyond preventing the body from falling or shaking.
索引モデルが issue の本文から書いたものです。
説明
Describe the bug
I have been running into some issues trying to simulate joint movement in our mobile robot, built with the URDF importer. I am moving the robot by changing the target parameter in the articulation body component leaving target velocity permanently as 0. As I use the values recommended for stiffness, damping and force limit with the REAL MASSES of the parts(each arm is a total 4.5 kg, body 65 kg and wheels 1 kg) the result is that the robot falls on its face when lifting both arms upwards. Increasing stiffness makes the joints more firm but increases the force on the robot body on the other hand increasing damping makes the joint weak to the pull of gravity to a point where they refuse to respond at all. A compromise I found was to increase the mass of either the wheels, the body or a combination of the two significantly which in turn hurts the accuracy(which is a big focus for us) and makes the robot jitters slightly in so creating an effect of the world shaking and lastly sudden movements still rattle the robot. I have been trying to find a sweet spot where the world doesn't shake, the joints are not "limp" and the robot doesn't fall to the ground from basic movement and have been falling short of reaching this goal. Any advice would be greatly appreciated. Trying to remove wheels or create collision really small to make sure they dont interfere with each other has no yielded any positive results.
To Reproduce
- Create a simple robot URDF with just a body and two arms with two links each
- make the body mass 65 and arms 4.5
- make the second joint of the arm lift the arm upwards
- lift both arms up at the same time
Expected behavior
I expected the arm to rise while the body stay completely still, as the real robot behaves.
Screenshots
(https://user-images.githubusercontent.com/99715242/167649738-3c8a6d73-3c14-4f1e-8708-648f00f11c21.mp4)
Environment (please complete the following information, where applicable):
- Unity Version: Unity 2020.3.30f1
- Unity machine OS + version: Ubuntu 20.04
- ROS machine OS + version: Ubuntu 20.04, ROS Galactic
- ROS–Unity communication: no docker
- Branch or version: Ros Tcp Connector v:0.7.0, URDF Importer v:0.5.0
- 主要言語
- C#
- スター
- 2.6k
- フォーク
- 473
- PR マージ指標
- 30日以内にマージされた PR はありません
環境構築
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートあり
- コントリビューションガイドなし
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
Unity-Technologies/Unity-Robotics-Hub のほかの issue
-
難易度 3/5 1〜2日 初心者へのやさしさ 35/100
-
ROS2,Actionオープン
難易度 4/5 3〜5日 初心者へのやさしさ 25/100
-
難易度 1/5 1時間未満 初心者へのやさしさ 20/100
-
Force/Torque sensorオープン
難易度 5/5 1週間以上 初心者へのやさしさ 15/100
-
難易度 4/5 3〜5日 初心者へのやさしさ 25/100
Unity-Technologies/Unity-Robotics-Hub#433 · コメント 1 件 ·
Unity-Technologies/Unity-Robotics-Hub の issue をすべて見る
似ている issue
-
bug
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
メンテナーはふだん 3 日以内に返信
-
bug python
難易度 1/5 1時間未満 初心者へのやさしさ 88/100
ilia-sokolov/OfficeAgent.NET#89 ·
メンテナーはふだん 13 日以内に返信
-
documentation
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
juandresrodca/AdminForge#66 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 70/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
umbraco/Umbraco.Automate#612 ·
メンテナーはふだん 1 日以内に返信