Support request: GA36-MB V1.1-20251025 with replacement panel ZL040FIBN60

Đang mở
#148 1 bình luận 0 reaction 0 người được giao Xem trên GitHub

Chưa có ai nhận issue này.

Đánh giá

Độ khó
5/5
Thời gian dự kiến
Hơn một tuần
Mức phù hợp với người mới
28/100
Loại issue
Tính năng
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
cpp
Lĩnh vực
embedded-iot

Hướng nghiên cứu

Start by identifying the display driver and initialization sequence used for the existing FPC-LCM035-50 panel, then compare them with the replacement ZL040FIBN60 panel; the issue names no source files or tests. Ask the reporter for the panel datasheet or controller IC and USB serial logs to establish what support requires. Done means the replacement panel displays correctly with goodluckOS.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

Hi, and thanks for goodluckOS!

I have a GA36-MB V1.1-20251025 console (Allwinner A33, stock EmuELEC 4.7).
The original screen's flex cable tore, so I replaced it with a new panel,
and now the backlight turns on but nothing is displayed (stock firmware).

New panel:

  • Marking on the flex: ZL040FIBN60 (pins 1 and 30 marked)
  • 3.5", 640x480, MIPI, 30 pin
  • Sold for genuine R35S/R36S. The AliExpress listing also names
    FSD040B3016-A, HL-MP35HD-B-V5 and HL-PGDM035HD-C-V2

Old (original) panel:

  • Flex marking: FPC-LCM035-50 (the screen is now unusable)

I believe the new panel uses a different controller / init sequence than
the original one, so the display stays black.

Would it be possible to add support for this panel in goodluckOS?
I'm not a programmer, but I can help with testing:

  • I have a full backup image of my original SD card
  • I can flash test builds and report what happens
  • I can send photos of the board and flex cables (attached)
  • If you tell me how, I can try to capture the USB serial log on Windows

I can also ask the seller for the panel datasheet / controller IC
if that helps.

Thank you!

Ngôn ngữ chính
C++
Star
54
Fork
8
Merge trung bình
16 ngày 19 giờ
Pull request đã merge (30 ngày)
4

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của CodeZombie/goodluckOS

Tất cả issue của CodeZombie/goodluckOS

Issue tương tự

Thêm issue về C++

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.