Support request: GA36-MB V1.1-20251025 with replacement panel ZL040FIBN60

Aberta
#148 1 comentário 0 reações 0 responsáveis Ver no GitHub

Ninguém assumiu esta issue ainda.

Avaliação

Dificuldade
5/5
Tempo estimado
Mais de uma semana
Facilidade para iniciantes
28/100
Tipo de issue
Funcionalidade
Clareza
Razoavelmente clara
Status de atividade
Ativa
Stack de tecnologia
cpp
Domínio
embedded-iot

Direção de pesquisa

Start by identifying the display driver and initialization sequence used for the existing FPC-LCM035-50 panel, then compare them with the replacement ZL040FIBN60 panel; the issue names no source files or tests. Ask the reporter for the panel datasheet or controller IC and USB serial logs to establish what support requires. Done means the replacement panel displays correctly with goodluckOS.

Escrita pelo modelo de indexação a partir do texto da issue.

Descrição

Hi, and thanks for goodluckOS!

I have a GA36-MB V1.1-20251025 console (Allwinner A33, stock EmuELEC 4.7).
The original screen's flex cable tore, so I replaced it with a new panel,
and now the backlight turns on but nothing is displayed (stock firmware).

New panel:

  • Marking on the flex: ZL040FIBN60 (pins 1 and 30 marked)
  • 3.5", 640x480, MIPI, 30 pin
  • Sold for genuine R35S/R36S. The AliExpress listing also names
    FSD040B3016-A, HL-MP35HD-B-V5 and HL-PGDM035HD-C-V2

Old (original) panel:

  • Flex marking: FPC-LCM035-50 (the screen is now unusable)

I believe the new panel uses a different controller / init sequence than
the original one, so the display stays black.

Would it be possible to add support for this panel in goodluckOS?
I'm not a programmer, but I can help with testing:

  • I have a full backup image of my original SD card
  • I can flash test builds and report what happens
  • I can send photos of the board and flex cables (attached)
  • If you tell me how, I can try to capture the USB serial log on Windows

I can also ask the seller for the panel datasheet / controller IC
if that helps.

Thank you!

Linguagem predominante
C++
Estrelas
54
Forks
8
Merge médio
16d 19h
PRs com merge (30d)
4

Preparar o ambiente

Este projeto não oferece contêiner de desenvolvimento, Dockerfile nem guia de contribuição, então a configuração fica por sua conta: comece pelo README e veja nosso guia da primeira contribuição para os passos gerais.

Primeiros passos

  1. Leia a issue inteira e depois o guia de contribuição do projeto.
  2. Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
  3. Faça um fork do repositório e trabalhe em uma branch.
  4. Abra um pull request que referencie o número da issue.

Mais de CodeZombie/goodluckOS

Todas as issues de CodeZombie/goodluckOS

Issues semelhantes

Mais issues de C++

Receba novas issues na sua caixa de entrada

Um resumo curto de issues do GitHub para quem está começando.