Support request: GA36-MB V1.1-20251025 with replacement panel ZL040FIBN60

Ouverte
#148 1 commentaire 0 réactions 0 personnes assignées Voir sur GitHub

Personne n'a encore pris cette issue.

Évaluation

Difficulté
5/5
Temps estimé
Plus d'une semaine
Accessibilité débutants
28/100
Type d'issue
Fonctionnalité
Clarté
Plutôt claire
Activité
Active
Stack technique
cpp
Domaine
embedded-iot

Piste de recherche

Start by identifying the display driver and initialization sequence used for the existing FPC-LCM035-50 panel, then compare them with the replacement ZL040FIBN60 panel; the issue names no source files or tests. Ask the reporter for the panel datasheet or controller IC and USB serial logs to establish what support requires. Done means the replacement panel displays correctly with goodluckOS.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

Hi, and thanks for goodluckOS!

I have a GA36-MB V1.1-20251025 console (Allwinner A33, stock EmuELEC 4.7).
The original screen's flex cable tore, so I replaced it with a new panel,
and now the backlight turns on but nothing is displayed (stock firmware).

New panel:

  • Marking on the flex: ZL040FIBN60 (pins 1 and 30 marked)
  • 3.5", 640x480, MIPI, 30 pin
  • Sold for genuine R35S/R36S. The AliExpress listing also names
    FSD040B3016-A, HL-MP35HD-B-V5 and HL-PGDM035HD-C-V2

Old (original) panel:

  • Flex marking: FPC-LCM035-50 (the screen is now unusable)

I believe the new panel uses a different controller / init sequence than
the original one, so the display stays black.

Would it be possible to add support for this panel in goodluckOS?
I'm not a programmer, but I can help with testing:

  • I have a full backup image of my original SD card
  • I can flash test builds and report what happens
  • I can send photos of the board and flex cables (attached)
  • If you tell me how, I can try to capture the USB serial log on Windows

I can also ask the seller for the panel datasheet / controller IC
if that helps.

Thank you!

Langage dominant
C++
Étoiles
54
Forks
8
Merge moyen
16 j 19 h
PR mergées (30 j)
4

Préparer son environnement

Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de CodeZombie/goodluckOS

Toutes les issues de CodeZombie/goodluckOS

Issues similaires

Plus d'issues C++

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.