Support request: GA36-MB V1.1-20251025 with replacement panel ZL040FIBN60

Aperta
#148 1 commento 0 reazioni 0 assegnatari Vedi su GitHub

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
5/5
Tempo stimato
Più di una settimana
Idoneità per principianti
28/100
Tipo di issue
Funzionalità
Chiarezza
Abbastanza chiara
Stato di attività
Attiva
Stack tecnologico
cpp
Ambito
embedded-iot

Direzione di ricerca

Start by identifying the display driver and initialization sequence used for the existing FPC-LCM035-50 panel, then compare them with the replacement ZL040FIBN60 panel; the issue names no source files or tests. Ask the reporter for the panel datasheet or controller IC and USB serial logs to establish what support requires. Done means the replacement panel displays correctly with goodluckOS.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

Hi, and thanks for goodluckOS!

I have a GA36-MB V1.1-20251025 console (Allwinner A33, stock EmuELEC 4.7).
The original screen's flex cable tore, so I replaced it with a new panel,
and now the backlight turns on but nothing is displayed (stock firmware).

New panel:

  • Marking on the flex: ZL040FIBN60 (pins 1 and 30 marked)
  • 3.5", 640x480, MIPI, 30 pin
  • Sold for genuine R35S/R36S. The AliExpress listing also names
    FSD040B3016-A, HL-MP35HD-B-V5 and HL-PGDM035HD-C-V2

Old (original) panel:

  • Flex marking: FPC-LCM035-50 (the screen is now unusable)

I believe the new panel uses a different controller / init sequence than
the original one, so the display stays black.

Would it be possible to add support for this panel in goodluckOS?
I'm not a programmer, but I can help with testing:

  • I have a full backup image of my original SD card
  • I can flash test builds and report what happens
  • I can send photos of the board and flex cables (attached)
  • If you tell me how, I can try to capture the USB serial log on Windows

I can also ask the seller for the panel datasheet / controller IC
if that helps.

Thank you!

Lingua principale
C++
Stelle
54
Fork
8
Merge medio
16g 19h
PR unite (30g)
4

Preparare l'ambiente

Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di CodeZombie/goodluckOS

Tutte le issue di CodeZombie/goodluckOS

Issue simili

Altre issue su C++

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.