Support request: GA36-MB V1.1-20251025 with replacement panel ZL040FIBN60

Abierto
#148 1 comentario 0 reacciones 0 asignados Ver en GitHub

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
5/5
Tiempo estimado
Más de una semana
Aptitud para principiantes
28/100
Tipo de issue
Nueva funcionalidad
Claridad
Bastante claro
Estado de actividad
Activo
Stack tecnológico
cpp
Área
embedded-iot

Línea de trabajo

Start by identifying the display driver and initialization sequence used for the existing FPC-LCM035-50 panel, then compare them with the replacement ZL040FIBN60 panel; the issue names no source files or tests. Ask the reporter for the panel datasheet or controller IC and USB serial logs to establish what support requires. Done means the replacement panel displays correctly with goodluckOS.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

Hi, and thanks for goodluckOS!

I have a GA36-MB V1.1-20251025 console (Allwinner A33, stock EmuELEC 4.7).
The original screen's flex cable tore, so I replaced it with a new panel,
and now the backlight turns on but nothing is displayed (stock firmware).

New panel:

  • Marking on the flex: ZL040FIBN60 (pins 1 and 30 marked)
  • 3.5", 640x480, MIPI, 30 pin
  • Sold for genuine R35S/R36S. The AliExpress listing also names
    FSD040B3016-A, HL-MP35HD-B-V5 and HL-PGDM035HD-C-V2

Old (original) panel:

  • Flex marking: FPC-LCM035-50 (the screen is now unusable)

I believe the new panel uses a different controller / init sequence than
the original one, so the display stays black.

Would it be possible to add support for this panel in goodluckOS?
I'm not a programmer, but I can help with testing:

  • I have a full backup image of my original SD card
  • I can flash test builds and report what happens
  • I can send photos of the board and flex cables (attached)
  • If you tell me how, I can try to capture the USB serial log on Windows

I can also ask the seller for the panel datasheet / controller IC
if that helps.

Thank you!

Lenguaje dominante
C++
Estrellas
54
Forks
8
Merge medio
16 d 19 h
PR fusionados (30 d)
4

Preparar el entorno

Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de CodeZombie/goodluckOS

Todos los issues de CodeZombie/goodluckOS

Issues similares

Más issues de C++

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.