Question menu settings show the old value for 400 ms, and a quick change back is lost

Aberta
#3,970 0 comentários 0 reações 0 responsáveis Ver no GitHub

Mantenedores costumam responder em até 1 dia

Ninguém assumiu esta issue ainda.

Avaliação

Dificuldade
3/5
Tempo estimado
1-2 dias
Facilidade para iniciantes
64/100
Tipo de issue
Bug
Clareza
Claramente especificada
Status de atividade
Ativa
Stack de tecnologia
javascript, typescript
Domínio
frontend

Direção de pesquisa

Start in src/composables/useQuestion.ts at onExtraSettingsChange() and the debounced saveExtraSettings() (INPUT_DEBOUNCE_MS, 400 ms), then look at the menu controls that bind to props.extraSettings (the rating "Highest rating" select and the linear scale's lowest/highest selects). Reproduce on a form with a rating or linear scale question: pick a new value and watch the control lag, then pick the saved value back within 400 ms. Done when the control reflects the pick immediately and the last pick wins; verify by hand in the editor, since no test is named.

Escrita pelo modelo de indexação a partir do texto da issue.

Descrição

0. Needs triage bug

Please use the 👍 reaction to show that you are affected by the same issue. Please don't comment if you have no relevant information to add!

Describe the bug
Settings in a question's menu that are saved as extra settings go through onExtraSettingsChange() in src/composables/useQuestion.ts, which batches them and saves them through a debounced saveExtraSettings() (INPUT_DEBOUNCE_MS, 400 ms). Until that save runs, props.extraSettings still holds the saved value, and the controls are bound to it. This has two effects:

  1. A select such as "Highest rating" (or the lowest/highest value of a linear scale) keeps showing the old value for up to 400 ms after a new one is picked.
  2. Picking the saved value again within those 400 ms is lost: the control's model value already equals the saved value, so no change is emitted, and the pending other value is saved instead.

To Reproduce
Steps to reproduce the behavior:

  1. Edit a form with a rating question (#3637) or a linear scale.
  2. Open the question's menu and pick another value in the "Highest rating" select, e.g. 7 instead of 10.
  3. Watch the select: it shows 10 at about 300 ms and 7 at about 600 ms.
  4. Pick a value, then pick the previously saved value again within 400 ms: the first pick is saved.

Expected behavior
The control shows the picked value at once, and the last pick is the one saved, however quickly the user changes it.

A possible fix: keep the pending extra settings in a reactive local state that the controls read (saved value merged with pending changes), or flush the pending save before a control that shows the saved value is updated. The fix belongs in useQuestion, as all question types that save extra settings from their menu share this path.

Screenshots
N/A

Nextcloud (please complete the following information):

  • Nextcloud-Version: 36 (dev)
  • Forms-Version: main (5.5 development) with #3637

Desktop (please complete the following information):

  • OS: Windows 11
  • Browser: Microsoft Edge (Chromium)
  • Version: current

Smartphone (please complete the following information):

N/A

Browser log

No errors are logged; the behaviour follows from the debounce.

Additional context
Found in the review of #3637 (rating question). Validated and reproduced on a live Nextcloud 36 instance with the rating question of #3637: the select timing was measured, and the lost second pick was reproduced for the icon choice before #3637 switched it to @change. The "Highest rating" select is left as is in #3637, as the fix belongs in useQuestion. The linear scale's lowest and highest value selects use the same code path; they were not reproduced separately.

Assisted by Claude Code:claude-opus-5-5

Linguagem predominante
JavaScript
Estrelas
385
Forks
133
Merge médio
7h 54min
PRs com merge (30d)
157

Preparar o ambiente

Abrir no Codespaces

Inicia o contêiner de desenvolvimento do projeto no navegador, com a sua própria conta do GitHub.

Primeiros passos

  1. Leia a issue inteira e depois o guia de contribuição do projeto.
  2. Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
  3. Faça um fork do repositório e trabalhe em uma branch.
  4. Abra um pull request que referencie o número da issue.

Mais de nextcloud/forms

Todas as issues de nextcloud/forms

Issues semelhantes

Mais issues de JavaScript

Receba novas issues na sua caixa de entrada

Um resumo curto de issues do GitHub para quem está começando.