App preset: Please adjust LPD433 range choice for Repeat Mode of Companion
Maintainers usually reply within 1 day
Nobody has claimed this yet.
Assessment
- Difficulty
- 2/5
- Estimated time
- 1-3 hours
- Newbie friendliness
- 64/100
Research direction
Find the app's Repeat Mode preset code and compare its LPD433 frequency with the EU433 preset templates; the issue does not name a file or test. Start by locating where Repeat Mode sets its 433 MHz range, then check how the existing 868 MHz adjustment is represented. Done means the enforced EU433 range falls within 433.050–434.790 MHz and avoids the listed LoRaWAN channel centers.
Written by the indexing model from the issue text.
Description
This was previously discussed in the issue 1700, but I believe it was prematurely closed as completed.
868 MHz range (EU863-870) setting is now fixed so it currently lands within the slice O, 500 mW e.r.p. ≤ 10 % duty cycle , but 433 MHz remains invalid.
The frequency selection for LPD433 made available in the app, 433,000 MHz violates the regulatory boundaries in Europe and, it seems, is actually not permitted anywhere in the world: https://www.lansitec.com/blogs/lorawan-frequency-plan-by-country-or-region/
Specifically EU433 regulation (ETSI EN 300 220, see Annex B, page 79) lists:
Permitted e.r.p. Channel access and Maximum
Frequency Band occupation rules occupied
(e.g. Duty cycle) bandwidth
433,050 MHz to 434,790 MHz 10 mW 10 % The whole band
433,000 MHz enforced by the application is forbidden for LoRa purpose since it's not permitted in the plan.
Consequently it falls inside the larger ISM band 86, 430-440 MHz titled Medical data acquisition devices -- see the implementation decision.
I see that the preset templates for 433MHz for the EU are correct, so why not do with that range what you did with 869,495 for 868 MHz, move it 2 "channels" away?
The range enforced by the "Repeat Mode" mode should be bumped to the inside of 433,050 MHz .. 434,790 MHz range, and ideally avoid established LoRaWAN channels centred at 433,175 MHz, 433,375 MHz, and 433,575 MHz
Similarly it looks that 918,000 .. 918,000 might not be the best for the USA, but that's beyond my knowledge.
I understand ultimately the user is responsible for configuring their transceiver and choosing the right band (ie: 868 in the Europe, 918 in the US), but the current setting nudges the users in several countries (which only allows EU433 frequencies) to stray outside the permitted range.
Thanks :)
- Dominant language
- C
- Stars
- 3.9k
- Forks
- 1.5k
- Avg merge
- 2d 20h
- Merged PRs (30d)
- 55
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from meshcore-dev/MeshCore
-
Difficulty 1/5 Under an hour Newbie friendliness 88/100
meshcore-dev/MeshCore#3891 · 1 comment ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
meshcore-dev/MeshCore#3825 ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
meshcore-dev/MeshCore#3781 ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 70/100
meshcore-dev/MeshCore#3760 · 3 comments ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 67/100
meshcore-dev/MeshCore#3698 ·
Maintainers usually reply within 1 day
All issues in meshcore-dev/MeshCore
Similar issues
-
area:gates kind:gate-defect
Difficulty 2/5 1-3 hours Newbie friendliness 83/100
InauguralSystems/EigenScript#2476 ·
Maintainers usually reply within 1 day
-
Difficulty 1/5 Under an hour Newbie friendliness 92/100
flipperdevices/flipperzero-firmware#4520 ·
Maintainers usually reply within 1 day
-
area/build-framework kind/enhancement priority/low
Difficulty 2/5 1-3 hours Newbie friendliness 77/100
yugabyte/yugabyte-db#38826 ·
Maintainers usually reply within 1 day
-
bug grammar sev-3
Difficulty 2/5 1-3 hours Newbie friendliness 76/100
-
BUG/MEDIUM: regex: worker SIGSEGV when a regex is applied to an empty body on libc-regex buildsOpenstatus: needs-triage type: bug
Difficulty 2/5 1-3 hours Newbie friendliness 75/100