App preset: Please adjust LPD433 range choice for Repeat Mode of Companion

未关闭 适合新手
#3,826 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
2/5
预计耗时
1-3 小时
新手友好度
64/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
活跃
技术栈
c
领域
mobile

调研方向

找到应用的 Repeat Mode 预设代码,并将其 LPD433 频率与 EU433 预设模板进行比较;issue 未指定文件或测试。首先定位 Repeat Mode 设置 433 MHz 范围的位置,然后检查现有的 868 MHz 调整是如何表示的。完成标准是:强制执行的 EU433 范围落在 433.050–434.790 MHz 之内,并避开列出的 LoRaWAN 信道中心频率。

由索引模型根据 Issue 内容生成。

描述

This was previously discussed in the issue 1700, but I believe it was prematurely closed as completed.

868 MHz range (EU863-870) setting is now fixed so it currently lands within the slice O, 500 mW e.r.p. ≤ 10 % duty cycle , but 433 MHz remains invalid.

The frequency selection for LPD433 made available in the app, 433,000 MHz violates the regulatory boundaries in Europe and, it seems, is actually not permitted anywhere in the world: https://www.lansitec.com/blogs/lorawan-frequency-plan-by-country-or-region/

Specifically EU433 regulation (ETSI EN 300 220, see Annex B, page 79) lists:

      Permitted                 e.r.p.   Channel access and     Maximum      
  Frequency  Band                         occupation rules      occupied     
                                         (e.g. Duty cycle)      bandwidth

433,050 MHz to 434,790 MHz     10 mW            10 %          The whole band 

433,000 MHz enforced by the application is forbidden for LoRa purpose since it's not permitted in the plan.
Consequently it falls inside the larger ISM band 86, 430-440 MHz titled Medical data acquisition devices -- see the implementation decision.

I see that the preset templates for 433MHz for the EU are correct, so why not do with that range what you did with 869,495 for 868 MHz, move it 2 "channels" away?

The range enforced by the "Repeat Mode" mode should be bumped to the inside of 433,050 MHz .. 434,790 MHz range, and ideally avoid established LoRaWAN channels centred at 433,175 MHz, 433,375 MHz, and 433,575 MHz
Similarly it looks that 918,000 .. 918,000 might not be the best for the USA, but that's beyond my knowledge.

I understand ultimately the user is responsible for configuring their transceiver and choosing the right band (ie: 868 in the Europe, 918 in the US), but the current setting nudges the users in several countries (which only allows EU433 frequencies) to stray outside the permitted range.

Thanks :)

主要语言
C
星标
3.9k
派生
1.5k
平均合并
2 天 20 小时
30 天内合并 PR
55

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

meshcore-dev/MeshCore 的其他 Issue

查看 meshcore-dev/MeshCore 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。