App preset: Please adjust LPD433 range choice for Repeat Mode of Companion
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
調査の方向性
アプリのRepeat Modeプリセットのコードを見つけ、そのLPD433周波数をEU433プリセットテンプレートと比較してください。issueにはファイル名もテストも記載されていません。まず、Repeat Modeが433 MHzの範囲を設定している箇所を特定し、次に既存の868 MHz調整がどのように表現されているかを確認してください。EU433の強制範囲が433.050–434.790 MHz内に収まり、列挙されたLoRaWANチャネル中心周波数を避けていれば完了です。
索引モデルが issue の本文から書いたものです。
説明
This was previously discussed in the issue 1700, but I believe it was prematurely closed as completed.
868 MHz range (EU863-870) setting is now fixed so it currently lands within the slice O, 500 mW e.r.p. ≤ 10 % duty cycle , but 433 MHz remains invalid.
The frequency selection for LPD433 made available in the app, 433,000 MHz violates the regulatory boundaries in Europe and, it seems, is actually not permitted anywhere in the world: https://www.lansitec.com/blogs/lorawan-frequency-plan-by-country-or-region/
Specifically EU433 regulation (ETSI EN 300 220, see Annex B, page 79) lists:
Permitted e.r.p. Channel access and Maximum
Frequency Band occupation rules occupied
(e.g. Duty cycle) bandwidth
433,050 MHz to 434,790 MHz 10 mW 10 % The whole band
433,000 MHz enforced by the application is forbidden for LoRa purpose since it's not permitted in the plan.
Consequently it falls inside the larger ISM band 86, 430-440 MHz titled Medical data acquisition devices -- see the implementation decision.
I see that the preset templates for 433MHz for the EU are correct, so why not do with that range what you did with 869,495 for 868 MHz, move it 2 "channels" away?
The range enforced by the "Repeat Mode" mode should be bumped to the inside of 433,050 MHz .. 434,790 MHz range, and ideally avoid established LoRaWAN channels centred at 433,175 MHz, 433,375 MHz, and 433,575 MHz
Similarly it looks that 918,000 .. 918,000 might not be the best for the USA, but that's beyond my knowledge.
I understand ultimately the user is responsible for configuring their transceiver and choosing the right band (ie: 868 in the Europe, 918 in the US), but the current setting nudges the users in several countries (which only allows EU433 frequencies) to stray outside the permitted range.
Thanks :)
- 主要言語
- C
- スター
- 3.9k
- フォーク
- 1.5k
- 平均マージ
- 2日 20時間
- マージ済み PR(30日)
- 55
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
meshcore-dev/MeshCore のほかの issue
-
難易度 1/5 1時間未満 初心者へのやさしさ 88/100
meshcore-dev/MeshCore#3891 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 68/100
meshcore-dev/MeshCore#3825 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
meshcore-dev/MeshCore#3781 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 70/100
meshcore-dev/MeshCore#3760 · コメント 3 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 67/100
meshcore-dev/MeshCore#3698 ·
メンテナーはふだん 1 日以内に返信
meshcore-dev/MeshCore の issue をすべて見る
似ている issue
-
area:gates kind:gate-defect
難易度 2/5 1〜3時間 初心者へのやさしさ 83/100
InauguralSystems/EigenScript#2476 ·
メンテナーはふだん 1 日以内に返信
-
難易度 1/5 1時間未満 初心者へのやさしさ 92/100
flipperdevices/flipperzero-firmware#4520 ·
メンテナーはふだん 1 日以内に返信
-
area/build-framework kind/enhancement priority/low
難易度 2/5 1〜3時間 初心者へのやさしさ 77/100
yugabyte/yugabyte-db#38826 ·
メンテナーはふだん 1 日以内に返信
-
bug grammar sev-3
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
-
BUG/MEDIUM: regex: worker SIGSEGV when a regex is applied to an empty body on libc-regex buildsオープンstatus: needs-triage type: bug
難易度 2/5 1〜3時間 初心者へのやさしさ 75/100