App preset: Please adjust LPD433 range choice for Repeat Mode of Companion
Los mantenedores suelen responder en 1 día
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 2/5
- Tiempo estimado
- 1-3 horas
- Aptitud para principiantes
- 64/100
Línea de trabajo
Encuentra el código del preajuste Repeat Mode de la aplicación y compara su frecuencia LPD433 con las plantillas de preajustes EU433; el issue no indica ningún archivo ni prueba. Empieza por localizar dónde Repeat Mode establece su rango de 433 MHz y luego comprueba cómo se representa el ajuste existente de 868 MHz. La tarea estará terminada cuando el rango EU433 impuesto esté dentro de 433.050–434.790 MHz y evite los centros de canal LoRaWAN enumerados.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
This was previously discussed in the issue 1700, but I believe it was prematurely closed as completed.
868 MHz range (EU863-870) setting is now fixed so it currently lands within the slice O, 500 mW e.r.p. ≤ 10 % duty cycle , but 433 MHz remains invalid.
The frequency selection for LPD433 made available in the app, 433,000 MHz violates the regulatory boundaries in Europe and, it seems, is actually not permitted anywhere in the world: https://www.lansitec.com/blogs/lorawan-frequency-plan-by-country-or-region/
Specifically EU433 regulation (ETSI EN 300 220, see Annex B, page 79) lists:
Permitted e.r.p. Channel access and Maximum
Frequency Band occupation rules occupied
(e.g. Duty cycle) bandwidth
433,050 MHz to 434,790 MHz 10 mW 10 % The whole band
433,000 MHz enforced by the application is forbidden for LoRa purpose since it's not permitted in the plan.
Consequently it falls inside the larger ISM band 86, 430-440 MHz titled Medical data acquisition devices -- see the implementation decision.
I see that the preset templates for 433MHz for the EU are correct, so why not do with that range what you did with 869,495 for 868 MHz, move it 2 "channels" away?
The range enforced by the "Repeat Mode" mode should be bumped to the inside of 433,050 MHz .. 434,790 MHz range, and ideally avoid established LoRaWAN channels centred at 433,175 MHz, 433,375 MHz, and 433,575 MHz
Similarly it looks that 918,000 .. 918,000 might not be the best for the USA, but that's beyond my knowledge.
I understand ultimately the user is responsible for configuring their transceiver and choosing the right band (ie: 868 in the Europe, 918 in the US), but the current setting nudges the users in several countries (which only allows EU433 frequencies) to stray outside the permitted range.
Thanks :)
- Lenguaje dominante
- C
- Estrellas
- 3.9k
- Forks
- 1.5k
- Merge medio
- 2 d 20 h
- PR fusionados (30 d)
- 55
Preparar el entorno
Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de meshcore-dev/MeshCore
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 88/100
meshcore-dev/MeshCore#3891 · 1 comentario ·
Los mantenedores suelen responder en 1 día
-
App Preset Australia: NTAbierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
meshcore-dev/MeshCore#3825 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
meshcore-dev/MeshCore#3781 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 70/100
meshcore-dev/MeshCore#3760 · 3 comentarios ·
Los mantenedores suelen responder en 1 día
-
Discover Filters Half WorkingAbierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 67/100
meshcore-dev/MeshCore#3698 ·
Los mantenedores suelen responder en 1 día
Todos los issues de meshcore-dev/MeshCore
Issues similares
-
area:gates kind:gate-defect
Dificultad 2/5 1-3 horas Aptitud para principiantes 83/100
InauguralSystems/EigenScript#2476 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 92/100
flipperdevices/flipperzero-firmware#4520 ·
Los mantenedores suelen responder en 1 día
-
area/build-framework kind/enhancement priority/low
Dificultad 2/5 1-3 horas Aptitud para principiantes 77/100
yugabyte/yugabyte-db#38826 ·
Los mantenedores suelen responder en 1 día
-
bug grammar sev-3
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
-
BUG/MEDIUM: regex: worker SIGSEGV when a regex is applied to an empty body on libc-regex buildsAbiertostatus: needs-triage type: bug
Dificultad 2/5 1-3 horas Aptitud para principiantes 75/100