Port LiDAR Motion Distortion Correction to Awkernel

Offen
#760 0 Kommentare 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Maintainer antworten meist innerhalb von 2 Tagen

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
5/5
Geschätzter Aufwand
Über eine Woche
Anfängerfreundlichkeit
15/100
Issue-Typ
Feature
Klarheit
Größtenteils klar
Aktivitätsstatus
Aktiv
Tech-Stack
rust
Bereich
robotics

Rechercherichtung

The issue names no files, tests or entry points, so begin by settling the open questions: which Autoware reference implementation and correction mode to match, the unit of the per-point timestamps, and the output timestamp semantics. Work through the scope list in order. Done means the acceptance criteria pass: the stationary case leaves coordinates unchanged, and synthetic trajectory tests cover translation, rotation, extrinsics and rejection of insufficient motion data.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

Implement LiDAR motion distortion correction in Awkernel using per-point timestamps and vehicle motion estimates. Transform points acquired at different times into a common scan reference frame, matching the behavior of the selected Autoware reference implementation and correction mode.

Scope:

  • Interpret per-point timestamps, including their units and relationship to the scan timestamp
  • Buffer timestamped vehicle twist estimates and IMU angular velocity when required by the selected correction mode
  • Estimate relative motion between each point’s acquisition time and the scan reference time
  • Apply sensor extrinsics and motion compensation consistently with the defined coordinate-frame conventions
  • Preserve required point fields and document output timestamp semantics
  • Define behavior for insufficient motion-history coverage, invalid timestamps, and excessive interpolation or extrapolation gaps

Acceptance criteria:

  • Corrected point coordinates match the reference implementation within predefined tolerances under identical inputs and configuration.
  • Tests cover stationary conditions, constant translation, constant rotation, and combined motion.
  • Synthetic tests with known trajectories verify correction direction, reference time, and sensor extrinsic handling.
  • The stationary case leaves point coordinates unchanged within numerical tolerance.
  • Tests cover non-identity sensor extrinsics, scan-boundary timestamps, and missing or stale motion estimates.
  • Unsupported or insufficient motion data triggers a documented rejection or explicitly flagged fallback rather than silent correction.
  • Execution time and memory usage are measured across representative point counts and motion-input rates.
  • Test datasets, parameters, and reproduction steps are documented.

Out of scope:

Sensor calibration estimation, IMU bias estimation, changes to gyro odometry or EKF algorithms, and full-pipeline accuracy evaluation.

Vorherrschende Sprache
Rust
Sterne
282
Forks
12
Ø Merge
2 T. 9 Std.
Gemergte PRs (30 T.)
28

Entwicklungsumgebung

Dieses Projekt bietet weder Dev-Container noch Dockerfile noch Beitragsleitfaden – die Einrichtung liegt bei Ihnen. Beginnen Sie mit der README; die allgemeinen Schritte stehen in unserem Leitfaden für den ersten Beitrag.

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus tier4/awkernel

Alle Issues in tier4/awkernel

Ähnliche Issues

Weitere Issues zu Rust

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.