Port LiDAR Motion Distortion Correction to Awkernel
I maintainer di solito rispondono entro 2 giorni
Nessuno ha ancora preso questa issue.
Valutazione
- Difficoltà
- 5/5
- Tempo stimato
- Più di una settimana
- Idoneità per principianti
- 15/100
Direzione di ricerca
The issue names no files, tests or entry points, so begin by settling the open questions: which Autoware reference implementation and correction mode to match, the unit of the per-point timestamps, and the output timestamp semantics. Work through the scope list in order. Done means the acceptance criteria pass: the stationary case leaves coordinates unchanged, and synthetic trajectory tests cover translation, rotation, extrinsics and rejection of insufficient motion data.
Scritto dal modello di indicizzazione a partire dal testo della issue.
Descrizione
Implement LiDAR motion distortion correction in Awkernel using per-point timestamps and vehicle motion estimates. Transform points acquired at different times into a common scan reference frame, matching the behavior of the selected Autoware reference implementation and correction mode.
Scope:
- Interpret per-point timestamps, including their units and relationship to the scan timestamp
- Buffer timestamped vehicle twist estimates and IMU angular velocity when required by the selected correction mode
- Estimate relative motion between each point’s acquisition time and the scan reference time
- Apply sensor extrinsics and motion compensation consistently with the defined coordinate-frame conventions
- Preserve required point fields and document output timestamp semantics
- Define behavior for insufficient motion-history coverage, invalid timestamps, and excessive interpolation or extrapolation gaps
Acceptance criteria:
- Corrected point coordinates match the reference implementation within predefined tolerances under identical inputs and configuration.
- Tests cover stationary conditions, constant translation, constant rotation, and combined motion.
- Synthetic tests with known trajectories verify correction direction, reference time, and sensor extrinsic handling.
- The stationary case leaves point coordinates unchanged within numerical tolerance.
- Tests cover non-identity sensor extrinsics, scan-boundary timestamps, and missing or stale motion estimates.
- Unsupported or insufficient motion data triggers a documented rejection or explicitly flagged fallback rather than silent correction.
- Execution time and memory usage are measured across representative point counts and motion-input rates.
- Test datasets, parameters, and reproduction steps are documented.
Out of scope:
Sensor calibration estimation, IMU bias estimation, changes to gyro odometry or EKF algorithms, and full-pipeline accuracy evaluation.
- Lingua principale
- Rust
- Stelle
- 282
- Fork
- 12
- Merge medio
- 2g 9h
- PR unite (30g)
- 28
Preparare l'ambiente
Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.
Come iniziare
- Leggi tutta la issue e poi la guida ai contributi del progetto.
- Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
- Fai un fork del repository e lavora su un branch.
- Apri una pull request che faccia riferimento al numero della issue.
Altre issue di tier4/awkernel
-
Difficoltà 1/5 Meno di un'ora Idoneità per principianti 88/100
I maintainer di solito rispondono entro 2 giorni
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 75/100
I maintainer di solito rispondono entro 2 giorni
-
Difficoltà 4/5 3-5 giorni Idoneità per principianti 48/100
I maintainer di solito rispondono entro 2 giorni
-
Difficoltà 4/5 3-5 giorni Idoneità per principianti 48/100
I maintainer di solito rispondono entro 2 giorni
-
Deadlock in ixgbeAperta
Difficoltà 4/5 3-5 giorni Idoneità per principianti 25/100
I maintainer di solito rispondono entro 2 giorni
Tutte le issue di tier4/awkernel
Issue simili
-
marketing
Difficoltà 2/5 1-3 ore Idoneità per principianti 82/100
I maintainer di solito rispondono entro 1 giorno
-
Difficoltà 1/5 Meno di un'ora Idoneità per principianti 88/100
flashbots/panetiere#46 · 1 commento ·
I maintainer di solito rispondono entro 5 giorni
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 78/100
jlcodes99/cockpit-tools#3190 ·
I maintainer di solito rispondono entro 4 giorni
-
Difficoltà 2/5 1-3 ore Idoneità per principianti 72/100
Feyisara2108/stellargive#1376 ·
I maintainer di solito rispondono entro 1 giorno
-
area:post bug effort:medium P7 source:agent
Difficoltà 2/5 1-3 ore Idoneità per principianti 78/100
I maintainer di solito rispondono entro 1 giorno