Port LiDAR Motion Distortion Correction to Awkernel
维护者通常 2 天内回复
还没有人认领这个 Issue。
评估
调研方向
The issue names no files, tests or entry points, so begin by settling the open questions: which Autoware reference implementation and correction mode to match, the unit of the per-point timestamps, and the output timestamp semantics. Work through the scope list in order. Done means the acceptance criteria pass: the stationary case leaves coordinates unchanged, and synthetic trajectory tests cover translation, rotation, extrinsics and rejection of insufficient motion data.
由索引模型根据 Issue 内容生成。
描述
Implement LiDAR motion distortion correction in Awkernel using per-point timestamps and vehicle motion estimates. Transform points acquired at different times into a common scan reference frame, matching the behavior of the selected Autoware reference implementation and correction mode.
Scope:
- Interpret per-point timestamps, including their units and relationship to the scan timestamp
- Buffer timestamped vehicle twist estimates and IMU angular velocity when required by the selected correction mode
- Estimate relative motion between each point’s acquisition time and the scan reference time
- Apply sensor extrinsics and motion compensation consistently with the defined coordinate-frame conventions
- Preserve required point fields and document output timestamp semantics
- Define behavior for insufficient motion-history coverage, invalid timestamps, and excessive interpolation or extrapolation gaps
Acceptance criteria:
- Corrected point coordinates match the reference implementation within predefined tolerances under identical inputs and configuration.
- Tests cover stationary conditions, constant translation, constant rotation, and combined motion.
- Synthetic tests with known trajectories verify correction direction, reference time, and sensor extrinsic handling.
- The stationary case leaves point coordinates unchanged within numerical tolerance.
- Tests cover non-identity sensor extrinsics, scan-boundary timestamps, and missing or stale motion estimates.
- Unsupported or insufficient motion data triggers a documented rejection or explicitly flagged fallback rather than silent correction.
- Execution time and memory usage are measured across representative point counts and motion-input rates.
- Test datasets, parameters, and reproduction steps are documented.
Out of scope:
Sensor calibration estimation, IMU bias estimation, changes to gyro odometry or EKF algorithms, and full-pipeline accuracy evaluation.
- 主要语言
- Rust
- 星标
- 282
- 派生
- 12
- 平均合并
- 2 天 9 小时
- 30 天内合并 PR
- 28
环境准备
这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
tier4/awkernel 的其他 Issue
-
难度 1/5 1 小时以内 新手友好度 88/100
维护者通常 2 天内回复
-
难度 2/5 1-3 小时 新手友好度 75/100
维护者通常 2 天内回复
-
难度 4/5 3-5 天 新手友好度 48/100
维护者通常 2 天内回复
-
难度 4/5 3-5 天 新手友好度 48/100
维护者通常 2 天内回复
-
难度 4/5 3-5 天 新手友好度 25/100
维护者通常 2 天内回复
相似的 Issue
-
marketing
难度 2/5 1-3 小时 新手友好度 82/100
维护者通常 1 天内回复
-
难度 1/5 1 小时以内 新手友好度 88/100
flashbots/panetiere#46 · 1 条评论 ·
维护者通常 5 天内回复
-
难度 2/5 1-3 小时 新手友好度 78/100
jlcodes99/cockpit-tools#3190 ·
维护者通常 4 天内回复
-
难度 2/5 1-3 小时 新手友好度 72/100
Feyisara2108/stellargive#1376 ·
维护者通常 1 天内回复
-
area:post bug effort:medium P7 source:agent
难度 2/5 1-3 小时 新手友好度 78/100
维护者通常 1 天内回复