Port LiDAR Motion Distortion Correction to Awkernel
メンテナーはふだん 2 日以内に返信
まだ誰も着手していません。
評価
調査の方向性
The issue names no files, tests or entry points, so begin by settling the open questions: which Autoware reference implementation and correction mode to match, the unit of the per-point timestamps, and the output timestamp semantics. Work through the scope list in order. Done means the acceptance criteria pass: the stationary case leaves coordinates unchanged, and synthetic trajectory tests cover translation, rotation, extrinsics and rejection of insufficient motion data.
索引モデルが issue の本文から書いたものです。
説明
Implement LiDAR motion distortion correction in Awkernel using per-point timestamps and vehicle motion estimates. Transform points acquired at different times into a common scan reference frame, matching the behavior of the selected Autoware reference implementation and correction mode.
Scope:
- Interpret per-point timestamps, including their units and relationship to the scan timestamp
- Buffer timestamped vehicle twist estimates and IMU angular velocity when required by the selected correction mode
- Estimate relative motion between each point’s acquisition time and the scan reference time
- Apply sensor extrinsics and motion compensation consistently with the defined coordinate-frame conventions
- Preserve required point fields and document output timestamp semantics
- Define behavior for insufficient motion-history coverage, invalid timestamps, and excessive interpolation or extrapolation gaps
Acceptance criteria:
- Corrected point coordinates match the reference implementation within predefined tolerances under identical inputs and configuration.
- Tests cover stationary conditions, constant translation, constant rotation, and combined motion.
- Synthetic tests with known trajectories verify correction direction, reference time, and sensor extrinsic handling.
- The stationary case leaves point coordinates unchanged within numerical tolerance.
- Tests cover non-identity sensor extrinsics, scan-boundary timestamps, and missing or stale motion estimates.
- Unsupported or insufficient motion data triggers a documented rejection or explicitly flagged fallback rather than silent correction.
- Execution time and memory usage are measured across representative point counts and motion-input rates.
- Test datasets, parameters, and reproduction steps are documented.
Out of scope:
Sensor calibration estimation, IMU bias estimation, changes to gyro odometry or EKF algorithms, and full-pipeline accuracy evaluation.
- 主要言語
- Rust
- スター
- 282
- フォーク
- 12
- 平均マージ
- 2日 9時間
- マージ済み PR(30日)
- 28
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
tier4/awkernel のほかの issue
-
難易度 1/5 1時間未満 初心者へのやさしさ 88/100
メンテナーはふだん 2 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 75/100
メンテナーはふだん 2 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
メンテナーはふだん 2 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
メンテナーはふだん 2 日以内に返信
-
Deadlock in ixgbeオープン
難易度 4/5 3〜5日 初心者へのやさしさ 25/100
メンテナーはふだん 2 日以内に返信
似ている issue
-
marketing
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
メンテナーはふだん 1 日以内に返信
-
難易度 1/5 1時間未満 初心者へのやさしさ 88/100
flashbots/panetiere#46 · コメント 1 件 ·
メンテナーはふだん 5 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
jlcodes99/cockpit-tools#3190 ·
メンテナーはふだん 4 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
Feyisara2108/stellargive#1376 ·
メンテナーはふだん 1 日以内に返信
-
area:post bug effort:medium P7 source:agent
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信