Touch Display 2 (ilitek_v3): periodic phantom touch at a fixed point every 12.864 s

Offen
#7,638 1 Kommentar 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Maintainer antworten meist innerhalb von 1 Tag

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
4/5
Geschätzter Aufwand
3-5 Tage
Anfängerfreundlichkeit
52/100
Issue-Typ
Bug
Klarheit
Größtenteils klar
Aktivitätsstatus
Aktiv
Tech-Stack
c, linux

Rechercherichtung

Start with the ilitek_v3 touchscreen driver and its handling of the well-formed 0x5B axis packets described in the report. Reproduce the issue with sudo libinput debug-events on the listed Touch Display 2 setup; done means the periodic phantom TOUCH_DOWN/TOUCH_UP events stop without introducing packet errors.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

Describe the bug

Pi 5, Touch Display 2 10", Raspberry Pi OS trixie, kernel 6.18.50+rpt-rpi-2712, portrait (no transform), nothing touching the panel.

libinput debug-events shows a zero-duration TOUCH_DOWN/TOUCH_UP at exactly 95.00/2.40 (1140/46 mm) every 12.864 s, indefinitely:

event6 TOUCH_DOWN +64.288s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +64.288s 0 (0)
event6 TOUCH_DOWN +77.152s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +77.152s 0 (0)
event6 TOUCH_DOWN +90.016s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +90.016s 0 (0)

dmesg: ilitek_v3 11-0041: protocol version 00060522, FW AP Version 140.0.7.0, Core 2.2.0.3, Configured size 1200 x 1920 swapxy. No checksum or length errors logged, so the packet is a well-formed 0x5B axis packet from the controller.

Effect: any idle/screen-blanking setup (swayidle + wlopm) never engages, and kiosk pages get a click at that point every 13 s. Looks like the same class as #4749 / 99ba5ff on the 7" panel. Happy to test a patch.

Steps to reproduce the behaviour
  1. Pi 5 + Touch Display 2 10" on DSI, Raspberry Pi OS trixie (64-bit), fully updated (kernel 6.18.50+rpt-rpi-2712). Display powered from the Pi's 5V header, official 27 W supply.
  2. Boot to the labwc desktop. Do not touch the panel.
  3. Run: sudo libinput debug-events
  4. Wait a minute.

Expected: no touch events.
Actual: a zero-duration TOUCH_DOWN/TOUCH_UP at exactly 95.00/2.40 (1140/46 mm) every 12.864 s, indefinitely. No errors in dmesg.

Device (s)

Raspberry Pi 5

System

https://pastebin.com/rH0wb5n3

Logs

No response

Additional context

No response

Vorherrschende Sprache
C
Sterne
13.3k
Forks
5.5k
Ø Merge
4 T. 10 Std.
Gemergte PRs (30 T.)
31

Entwicklungsumgebung

Dieses Projekt bietet weder Dev-Container noch Dockerfile noch Beitragsleitfaden – die Einrichtung liegt bei Ihnen. Beginnen Sie mit der README; die allgemeinen Schritte stehen in unserem Leitfaden für den ersten Beitrag.

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus raspberrypi/linux

Alle Issues in raspberrypi/linux

Ähnliche Issues

Weitere Issues zu C

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.