Touch Display 2 (ilitek_v3): periodic phantom touch at a fixed point every 12.864 s

未关闭
#7,638 1 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
4/5
预计耗时
3-5 天
新手友好度
52/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
活跃
技术栈
c, linux

调研方向

Start with the ilitek_v3 touchscreen driver and its handling of the well-formed 0x5B axis packets described in the report. Reproduce the issue with sudo libinput debug-events on the listed Touch Display 2 setup; done means the periodic phantom TOUCH_DOWN/TOUCH_UP events stop without introducing packet errors.

由索引模型根据 Issue 内容生成。

描述

Describe the bug

Pi 5, Touch Display 2 10", Raspberry Pi OS trixie, kernel 6.18.50+rpt-rpi-2712, portrait (no transform), nothing touching the panel.

libinput debug-events shows a zero-duration TOUCH_DOWN/TOUCH_UP at exactly 95.00/2.40 (1140/46 mm) every 12.864 s, indefinitely:

event6 TOUCH_DOWN +64.288s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +64.288s 0 (0)
event6 TOUCH_DOWN +77.152s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +77.152s 0 (0)
event6 TOUCH_DOWN +90.016s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +90.016s 0 (0)

dmesg: ilitek_v3 11-0041: protocol version 00060522, FW AP Version 140.0.7.0, Core 2.2.0.3, Configured size 1200 x 1920 swapxy. No checksum or length errors logged, so the packet is a well-formed 0x5B axis packet from the controller.

Effect: any idle/screen-blanking setup (swayidle + wlopm) never engages, and kiosk pages get a click at that point every 13 s. Looks like the same class as #4749 / 99ba5ff on the 7" panel. Happy to test a patch.

Steps to reproduce the behaviour
  1. Pi 5 + Touch Display 2 10" on DSI, Raspberry Pi OS trixie (64-bit), fully updated (kernel 6.18.50+rpt-rpi-2712). Display powered from the Pi's 5V header, official 27 W supply.
  2. Boot to the labwc desktop. Do not touch the panel.
  3. Run: sudo libinput debug-events
  4. Wait a minute.

Expected: no touch events.
Actual: a zero-duration TOUCH_DOWN/TOUCH_UP at exactly 95.00/2.40 (1140/46 mm) every 12.864 s, indefinitely. No errors in dmesg.

Device (s)

Raspberry Pi 5

System

https://pastebin.com/rH0wb5n3

Logs

No response

Additional context

No response

主要语言
C
星标
13.3k
派生
5.5k
平均合并
4 天 10 小时
30 天内合并 PR
31

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

raspberrypi/linux 的其他 Issue

查看 raspberrypi/linux 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。