Touch Display 2 (ilitek_v3): periodic phantom touch at a fixed point every 12.864 s

Aberta
#7,638 1 comentário 0 reações 0 responsáveis Ver no GitHub

Mantenedores costumam responder em até 1 dia

Ninguém assumiu esta issue ainda.

Avaliação

Dificuldade
4/5
Tempo estimado
3-5 dias
Facilidade para iniciantes
52/100
Tipo de issue
Bug
Clareza
Razoavelmente clara
Status de atividade
Ativa
Stack de tecnologia
c, linux

Direção de pesquisa

Start with the ilitek_v3 touchscreen driver and its handling of the well-formed 0x5B axis packets described in the report. Reproduce the issue with sudo libinput debug-events on the listed Touch Display 2 setup; done means the periodic phantom TOUCH_DOWN/TOUCH_UP events stop without introducing packet errors.

Escrita pelo modelo de indexação a partir do texto da issue.

Descrição

Describe the bug

Pi 5, Touch Display 2 10", Raspberry Pi OS trixie, kernel 6.18.50+rpt-rpi-2712, portrait (no transform), nothing touching the panel.

libinput debug-events shows a zero-duration TOUCH_DOWN/TOUCH_UP at exactly 95.00/2.40 (1140/46 mm) every 12.864 s, indefinitely:

event6 TOUCH_DOWN +64.288s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +64.288s 0 (0)
event6 TOUCH_DOWN +77.152s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +77.152s 0 (0)
event6 TOUCH_DOWN +90.016s 0 (0) 95.00/ 2.40 (1140.00/46.00mm)
event6 TOUCH_UP +90.016s 0 (0)

dmesg: ilitek_v3 11-0041: protocol version 00060522, FW AP Version 140.0.7.0, Core 2.2.0.3, Configured size 1200 x 1920 swapxy. No checksum or length errors logged, so the packet is a well-formed 0x5B axis packet from the controller.

Effect: any idle/screen-blanking setup (swayidle + wlopm) never engages, and kiosk pages get a click at that point every 13 s. Looks like the same class as #4749 / 99ba5ff on the 7" panel. Happy to test a patch.

Steps to reproduce the behaviour
  1. Pi 5 + Touch Display 2 10" on DSI, Raspberry Pi OS trixie (64-bit), fully updated (kernel 6.18.50+rpt-rpi-2712). Display powered from the Pi's 5V header, official 27 W supply.
  2. Boot to the labwc desktop. Do not touch the panel.
  3. Run: sudo libinput debug-events
  4. Wait a minute.

Expected: no touch events.
Actual: a zero-duration TOUCH_DOWN/TOUCH_UP at exactly 95.00/2.40 (1140/46 mm) every 12.864 s, indefinitely. No errors in dmesg.

Device (s)

Raspberry Pi 5

System

https://pastebin.com/rH0wb5n3

Logs

No response

Additional context

No response

Linguagem predominante
C
Estrelas
13.3k
Forks
5.5k
Merge médio
4d 10h
PRs com merge (30d)
31

Preparar o ambiente

Este projeto não oferece contêiner de desenvolvimento, Dockerfile nem guia de contribuição, então a configuração fica por sua conta: comece pelo README e veja nosso guia da primeira contribuição para os passos gerais.

Primeiros passos

  1. Leia a issue inteira e depois o guia de contribuição do projeto.
  2. Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
  3. Faça um fork do repositório e trabalhe em uma branch.
  4. Abra um pull request que referencie o número da issue.

Mais de raspberrypi/linux

Todas as issues de raspberrypi/linux

Issues semelhantes

Mais issues de C

Receba novas issues na sua caixa de entrada

Um resumo curto de issues do GitHub para quem está começando.