Follow-ups left open by TxMode::no_agg / NOAGG (#459)

Offen
#462 0 Kommentare 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Maintainer antworten meist innerhalb von 1 Tag

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
5/5
Geschätzter Aufwand
Über eine Woche
Anfängerfreundlichkeit
25/100
Issue-Typ
Feature
Klarheit
Klar beschrieben
Aktivitätsstatus
Aktiv
Tech-Stack
c, linux
Bereich
networking

Rechercherichtung

Start with tests/tx_no_agg_onair.sh for the measurement follow-ups; the issue names no code entry point for the driver ports. First determine which follow-up has suitable hardware and a reproducible bench, then read the prior results from #459. Done means delivering the requested measurements or a validated on-air port; several investigations remain open-ended and hardware-dependent.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

enhancement

Left open by #459 (TxMode::no_agg / /NOAGG, merged as 87dde96). None blocks the feature as shipped; each is a measurement or a port the PR explicitly did not claim.

  • Cost of occasional flagged frames. Only the every-other-frame worst case was measured (−47 % heard on the 8812EU, −60 % on the 8812CU). The realistic shape, one control frame every N aggregated video frames, is unmeasured. tests/tx_no_agg_onair.sh needs a duty knob (flag every Nth frame) and a goodput reading, not a heard-fps one.
  • Mixed-width fold. The A-MPDU folds bandwidth as well as rate (a 20 MHz frame behind a 40 MHz opener airs at 40). The harness scores rate only. Add a width arm once the witness's rx.seq carries the decoded bandwidth.
  • Port to Jaguar1 / Jaguar2 / MT7612U. tx_no_agg_ok is false there by design. Jaguar2 shares the halmac descriptor (SET_TX_DESC_BK dword2[16]) so it is likely the same two writes; Jaguar1's 8812A descriptor and the MT7612U TXWI need their own look. Each needs an on-air arm, not a code-reading.
  • Cross-rate fold on the 8822C is deeper than on the 8822E (24 % vs 40 % of MCS0 frames kept their rate unflagged, same script, same knobs). Unexplained. Candidates: USB high-speed vs SuperSpeed feed depth, or a die difference in how many MPDUs the MAC waits to accumulate. One unit per die so far.
  • 8812EU on the OpenIPC bench drops off the USB bus about 1 s after the TX bring-up reset (dmesg disconnect + re-enumerate; doctor HEALTHY on EFUSE/fw/RX). It ran a 60 s flood on 2026-09-26, so the bench changed. Rig, not code, but it is why the EU arm was not repeated here.
Vorherrschende Sprache
C
Sterne
56
Forks
29
Ø Merge
3 Std. 43 Min.
Gemergte PRs (30 T.)
75

Entwicklungsumgebung

Dieses Projekt bietet weder Dev-Container noch Dockerfile noch Beitragsleitfaden – die Einrichtung liegt bei Ihnen. Beginnen Sie mit der README; die allgemeinen Schritte stehen in unserem Leitfaden für den ersten Beitrag.

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus OpenIPC/devourer

Alle Issues in OpenIPC/devourer

Ähnliche Issues

Weitere Issues zu C

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.