Follow-ups left open by TxMode::no_agg / NOAGG (#459)

Đang mở
#462 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Maintainer thường phản hồi trong vòng 1 ngày

Chưa có ai nhận issue này.

Đánh giá

Độ khó
5/5
Thời gian dự kiến
Hơn một tuần
Mức phù hợp với người mới
25/100
Loại issue
Tính năng
Độ rõ ràng
Đặc tả rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
c, linux
Lĩnh vực
networking

Hướng nghiên cứu

Start with tests/tx_no_agg_onair.sh for the measurement follow-ups; the issue names no code entry point for the driver ports. First determine which follow-up has suitable hardware and a reproducible bench, then read the prior results from #459. Done means delivering the requested measurements or a validated on-air port; several investigations remain open-ended and hardware-dependent.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

enhancement

Left open by #459 (TxMode::no_agg / /NOAGG, merged as 87dde96). None blocks the feature as shipped; each is a measurement or a port the PR explicitly did not claim.

  • Cost of occasional flagged frames. Only the every-other-frame worst case was measured (−47 % heard on the 8812EU, −60 % on the 8812CU). The realistic shape, one control frame every N aggregated video frames, is unmeasured. tests/tx_no_agg_onair.sh needs a duty knob (flag every Nth frame) and a goodput reading, not a heard-fps one.
  • Mixed-width fold. The A-MPDU folds bandwidth as well as rate (a 20 MHz frame behind a 40 MHz opener airs at 40). The harness scores rate only. Add a width arm once the witness's rx.seq carries the decoded bandwidth.
  • Port to Jaguar1 / Jaguar2 / MT7612U. tx_no_agg_ok is false there by design. Jaguar2 shares the halmac descriptor (SET_TX_DESC_BK dword2[16]) so it is likely the same two writes; Jaguar1's 8812A descriptor and the MT7612U TXWI need their own look. Each needs an on-air arm, not a code-reading.
  • Cross-rate fold on the 8822C is deeper than on the 8822E (24 % vs 40 % of MCS0 frames kept their rate unflagged, same script, same knobs). Unexplained. Candidates: USB high-speed vs SuperSpeed feed depth, or a die difference in how many MPDUs the MAC waits to accumulate. One unit per die so far.
  • 8812EU on the OpenIPC bench drops off the USB bus about 1 s after the TX bring-up reset (dmesg disconnect + re-enumerate; doctor HEALTHY on EFUSE/fw/RX). It ran a 60 s flood on 2026-09-26, so the bench changed. Rig, not code, but it is why the EU arm was not repeated here.
Ngôn ngữ chính
C
Star
56
Fork
29
Merge trung bình
3 giờ 43 phút
Pull request đã merge (30 ngày)
75

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của OpenIPC/devourer

Tất cả issue của OpenIPC/devourer

Issue tương tự

Thêm issue về C

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.