Hacktoberfest 2026：メンテナが10月に向けて印を付けた、オープンで初心者向けの issue。 Hacktoberfest の issue を見る

`input` and `output` declarations are unusable

オープン
  • 何か問題がありますか？
#394 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
28/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
静か
技術スタック
python
領域
compilers

調査の方向性

Start with Qasm3Visitor._visit_classical_declaration in src/pyqasm/visitor.py, and check how the IODeclaration node from openqasm3 falls through without a scope entry. Reproduce the four failing snippets in the issue, then read tests/qasm3/test_declarations.py. Done means those snippets validate, output can be a measurement target, and dumps() keeps both qualifiers. The binding-versus-symbolic question must be settled by a maintainer before implementation.

索引モデルが issue の本文から書いたものです。

説明

enhancement llm-assisted qasm3 qasm3-coverage

Limitation

Input/output defines input and output
modifiers on classical declarations. input marks a value supplied at run time — the spec's
motivating case is a parameterised circuit compiled once and executed many times with
different angles. output marks a value returned to the host.

pyqasm parses both declarations but never registers them in scope. Any later use fails.

Example QASM failure

The spec's own parameterised-circuit pattern:

OPENQASM 3.0;
include "stdgates.inc";
input float[64] a;
qubit[1] q;
rx(a) q[0];
// ValidationError: Invalid parameter 'a' for gate 'rx'

An input used in ordinary classical code fails the same way:

OPENQASM 3.0;
input int[8] a;
int[8] b = a;
// ValidationError: Invalid initialization value for variable 'b'

output is not registered either:

OPENQASM 3.0;
output bit[2] c;
qubit[2] q;
c = measure q;
// ValidationError: Missing register declaration for 'c' in measurement operation

OPENQASM 3.0;
output int[8] c;
c = 1;
// ValidationError: Undefined variable c in assignment

A bare input bit[2] a; with no subsequent use validates cleanly, which confirms the
declaration is parsed and then discarded.

Change Requested

  1. Register input and output declarations in the global scope with their declared types,
    so that every later reference resolves.
  2. An output-qualified variable must be assignable, including as a measurement target.
  3. Preserve both qualifiers through dumps() — a round-trip must not silently turn an input
    into an ordinary declaration.
  4. Enforce the spec's scope rule: input and output are permitted only in global scope.

Open design question

pyqasm's unroller evaluates classical expressions to concrete values, but an input has no
value at analysis time. Two viable directions, and this issue should settle which:

  • Binding API — accept values at load or unroll time, e.g.
    pyqasm.loads(qasm, inputs={"a": 0.5}), and substitute them during unrolling. Concrete
    output, no representation change, but requires the caller to supply every input.
  • Symbolic passthrough — treat an unbound input as an opaque symbol, validate its type
    and usage, and emit the expression unevaluated. Keeps the program parameterised at the cost
    of expression handling that tolerates non-numeric operands.

Supporting both — bind when a value is given, pass through when it is not — is likely the
right end state, but the first increment should pick one. Maintainer input needed.

Implementation Details

  • openqasm3 exposes the qualifier as IOKeyword.input / IOKeyword.output on
    ClassicalDeclaration / IODeclaration. Confirm which node type the parser produces for
    each so the visitor branches correctly.
  • The declaration path is Qasm3Visitor._visit_classical_declaration in
    src/pyqasm/visitor.py; the IODeclaration node appears to fall through without a scope
    entry. Registering the variable is the minimal fix that clears all four failures above.
  • The error "Invalid parameter 'a' for gate 'rx'" comes from the gate-argument evaluation
    path — it fires because the identifier does not resolve, so scope registration fixes it
    directly under the binding approach, and requires expression-level tolerance under the
    symbolic approach.
  • output needs the variable marked assignable and visible to the measurement path that
    raises "Missing register declaration for 'c' in measurement operation".
  • Tests: tests/qasm3/test_declarations.py — input in a gate argument, input in classical
    arithmetic, output as a measurement target, output in a plain assignment, a dumps()
    round-trip preserving both keywords, and input declared inside a def body raising a
    ValidationError.
主要言語
Python
スター
29
フォーク
33
平均マージ
2日 4時間
マージ済み PR（30日）
15

環境構築

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

qBraid/pyqasm のほかの issue

qBraid/pyqasm の issue をすべて見る

似ている issue

Python の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。