Measure hw_injected_mgmt_txtsf on the 8812AU, 8814AU and MT7612U

オープン
#477 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
25/100
issue の種類
機能追加
明瞭さ
おおむね明確
活発さ
活発
技術スタック
c, shell
領域
networking

調査の方向性

Start with tests/probe_resp_egress_tsf_check.sh, which is the gate that measures whether the MAC overwrites the timestamp of an injected probe response, and with the AdapterCaps::hw_injected_mgmt_txtsf flag it feeds. This needs physical 8812AU, 8814AU and MT7612U adapters, so the first step is confirming hardware access. Done means each adapter has a recorded gate result, and where it is true, the flag is set in that family's GetAdapterCaps as described in docs/stream-timing.md.

索引モデルが issue の本文から書いたものです。

説明

enhancement

AdapterCaps::hw_injected_mgmt_txtsf says whether the MAC overwrites the timestamp field of a host-injected probe response / beacon with its live egress TSF. Measured with tests/probe_resp_egress_tsf_check.sh: true on Jaguar2 (8812BU), Jaguar3 (8812CU, 8812EU) and Kestrel (8832CU); false on Jaguar1 — the 8821AU rewrites the field with a free-running ~40-bit microsecond counter that is neither REG_TSFTR nor REG_TSFTR1 (both sampled live during the run with PR0_REGS=1), held for ~7 frames at a time. Its hardware TBTT beacon IS stamped (3.2 µs spread).

Open:

  • the 8812AU and 8814AU were not plugged and inherit false; run the gate on each when they are (one 15 s run per kind);
  • the MT7612U is unmeasured and inherits false;
  • what the 8821AU's counter actually is (a BT-combo clock? a firmware tick?) — useful only if it turns out to be a usable clock; otherwise the beacon fallback stands.
    A positive result flips the flag in that family's GetAdapterCaps and lets the stream-timing marker carry the clock while hopping there (docs/stream-timing.md).
主要言語
C
スター
56
フォーク
29
平均マージ
3時間 43分
マージ済み PR(30日)
75

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

OpenIPC/devourer のほかの issue

OpenIPC/devourer の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。