Measure hw_injected_mgmt_txtsf on the 8812AU, 8814AU and MT7612U

Abierto
#477 0 comentarios 0 reacciones 0 asignados Ver en GitHub

Los mantenedores suelen responder en 1 día

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
4/5
Tiempo estimado
3-5 días
Aptitud para principiantes
25/100
Tipo de issue
Nueva funcionalidad
Claridad
Bastante claro
Estado de actividad
Activo
Stack tecnológico
c, shell
Área
networking

Línea de trabajo

Start with tests/probe_resp_egress_tsf_check.sh, which is the gate that measures whether the MAC overwrites the timestamp of an injected probe response, and with the AdapterCaps::hw_injected_mgmt_txtsf flag it feeds. This needs physical 8812AU, 8814AU and MT7612U adapters, so the first step is confirming hardware access. Done means each adapter has a recorded gate result, and where it is true, the flag is set in that family's GetAdapterCaps as described in docs/stream-timing.md.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

enhancement

AdapterCaps::hw_injected_mgmt_txtsf says whether the MAC overwrites the timestamp field of a host-injected probe response / beacon with its live egress TSF. Measured with tests/probe_resp_egress_tsf_check.sh: true on Jaguar2 (8812BU), Jaguar3 (8812CU, 8812EU) and Kestrel (8832CU); false on Jaguar1 — the 8821AU rewrites the field with a free-running ~40-bit microsecond counter that is neither REG_TSFTR nor REG_TSFTR1 (both sampled live during the run with PR0_REGS=1), held for ~7 frames at a time. Its hardware TBTT beacon IS stamped (3.2 µs spread).

Open:

  • the 8812AU and 8814AU were not plugged and inherit false; run the gate on each when they are (one 15 s run per kind);
  • the MT7612U is unmeasured and inherits false;
  • what the 8821AU's counter actually is (a BT-combo clock? a firmware tick?) — useful only if it turns out to be a usable clock; otherwise the beacon fallback stands.
    A positive result flips the flag in that family's GetAdapterCaps and lets the stream-timing marker carry the clock while hopping there (docs/stream-timing.md).
Lenguaje dominante
C
Estrellas
56
Forks
29
Merge medio
3 h 43 min
PR fusionados (30 d)
75

Preparar el entorno

Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de OpenIPC/devourer

Todos los issues de OpenIPC/devourer

Issues similares

Más issues de C

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.