Measure hw_injected_mgmt_txtsf on the 8812AU, 8814AU and MT7612U

Ouverte
#477 0 commentaires 0 réactions 0 personnes assignées Voir sur GitHub

Les mainteneurs répondent en général sous 1 jour

Personne n'a encore pris cette issue.

Évaluation

Difficulté
4/5
Temps estimé
3-5 jours
Accessibilité débutants
25/100
Type d'issue
Fonctionnalité
Clarté
Plutôt claire
Activité
Active
Stack technique
c, shell
Domaine
networking

Piste de recherche

Start with tests/probe_resp_egress_tsf_check.sh, which is the gate that measures whether the MAC overwrites the timestamp of an injected probe response, and with the AdapterCaps::hw_injected_mgmt_txtsf flag it feeds. This needs physical 8812AU, 8814AU and MT7612U adapters, so the first step is confirming hardware access. Done means each adapter has a recorded gate result, and where it is true, the flag is set in that family's GetAdapterCaps as described in docs/stream-timing.md.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

enhancement

AdapterCaps::hw_injected_mgmt_txtsf says whether the MAC overwrites the timestamp field of a host-injected probe response / beacon with its live egress TSF. Measured with tests/probe_resp_egress_tsf_check.sh: true on Jaguar2 (8812BU), Jaguar3 (8812CU, 8812EU) and Kestrel (8832CU); false on Jaguar1 — the 8821AU rewrites the field with a free-running ~40-bit microsecond counter that is neither REG_TSFTR nor REG_TSFTR1 (both sampled live during the run with PR0_REGS=1), held for ~7 frames at a time. Its hardware TBTT beacon IS stamped (3.2 µs spread).

Open:

  • the 8812AU and 8814AU were not plugged and inherit false; run the gate on each when they are (one 15 s run per kind);
  • the MT7612U is unmeasured and inherits false;
  • what the 8821AU's counter actually is (a BT-combo clock? a firmware tick?) — useful only if it turns out to be a usable clock; otherwise the beacon fallback stands.
    A positive result flips the flag in that family's GetAdapterCaps and lets the stream-timing marker carry the clock while hopping there (docs/stream-timing.md).
Langage dominant
C
Étoiles
56
Forks
29
Merge moyen
3 h 43 min
PR mergées (30 j)
75

Préparer son environnement

Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de OpenIPC/devourer

Toutes les issues de OpenIPC/devourer

Issues similaires

Plus d'issues C

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.