Follow-ups left open by the station-series cleanup (#466)
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 35/100
- issue の種類
- バグ
- 明瞭さ
- おおむね明確
- 活発さ
- 活発
- 領域
- embedded-iot, testing
調査の方向性
Start by reading docs/mt7612u-tx-retry.md and the station harnesses named in the issue: realtek_station_onair.sh, mt7612u_sta_identity.sh, mt7612u_sta_uplink.sh, and mt7612u_ap_onair.sh; inspect the gate_txs implementation and related harness tests. The issue lists several independent fixes and observations, so confirm which follow-ups remain before changing anything. Done means correcting the actionable harness behaviors and documenting the settling limitation, with tests or hardware runs confirming the results.
索引モデルが issue の本文から書いたものです。
説明
Left open by #466 (merged as 1134df9): the station-series review follow-ups, part of the #465 harness sweep, the #461 stale-EXT claim in gate_txs, and the txdemo thread-join guards.
From the review (hardware: realtek_station_onair 5/5 on 8812CU + 8812BU + MT7612U AP; uplink A/B against master)
gate_txsstale-EXT claim can over-attribute. One arm on the review bench read61/60, 1 stale-EXT entries claimed, 11 foreign: the arm then received all 60 of its own entries, so the claimed one was not its own (or a MAC duplicate). Printed, not clipped, butsuccessis inflated by one. Suggested self-correction: track own-pktid entries separately and at arm end, if own == n and stale_ext == 1, move the claimed entry back tolate_prev.- The
stale_settledgate cascades. One UNSETTLED arm disables the claim for every following arm until one settles on its own - a chain of seven consecutive 59/60 arms on the review bench. Correct by the documented rule;docs/mt7612u-tx-retry.mdshould say the claim buys little on a unit whose arms do not settle. - The #461 multi-entry loss is far worse on a second unit. Unicast-to-peer gate arms (b-e) landed 0-11/60 own entries on both passes, ~10 per arm carrying the previous arm's pktid, identical on master. Not this PR; recorded here so #461 has the second data point.
realtek_station_onair.sh:tail_mscan be negative (-6 ms in arm C: the finaltx.statstpreceded the lasttx.reportt). Harmless tolive; clamp at 0 or note it in thesummarizecomment.mt7612u_sta_identity.sh: an overrun BSSID gate setsr_bss=2, but the verdictcasehas only0,3,*, so the operator reads "did not pass" for what the exit code calls INCONCLUSIVE. Add a2)branch.mt7612u_sta_uplink.sh:dut_boundis per harness arm (552 s at FRAMES=60, 1128 s at 200) while the header's 25-minute figure covers both arms; the margin for the slower un-ACKed arm at FRAMES=200 is thin. Size it from the measured figure.mt7612u_ap_onair.sh: on the KILL pathreapdropsKIDSwithoutwaiting the killed children, leaving zombies for the rest of the run.- Firmware readability preflight (#465 class). On a host whose MediaTek firmware is zstd-compressed (
/lib/firmware/mediatek/*.bin.zst),sta_fw_linksucceeds, the probe logscannot open firmware/mt7662_rom_patch.bin, and the uplink harness scoresABORTED the DUT did not confirm retry limit 15:with an empty reason. Checking the two blobs are readable through the link turns a dead rig into a refusal in seconds.
From the PR description
- Find the uplink harness's multi-entry status loss (#461).
- Unify the INT/TERM exit code across the station harnesses: realtek_station_onair, mt7612u_sta_onair and mt7612u_sta_identity exit 3; autoack, uplink and ap_onair still exit 130.
- From #465, not in #466: the generic Realtek DUT take, the reconnect cell and the CCMP soak (separate PR).
Done by the review, no action
- The "last arm that sent" form of the stale-EXT claim is now hardware-run (it coincided with the previous-arm form: no arm had every submit fail). The claim fired correctly on the session's first arm: 60/60 with 1 claimed on #466 against 59/60 UNSETTLED with 1 foreign on master.
- 主要言語
- C
- スター
- 56
- フォーク
- 29
- 平均マージ
- 3時間 43分
- マージ済み PR(30日)
- 75
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
OpenIPC/devourer のほかの issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
メンテナーはふだん 1 日以内に返信
-
Follow-ups left open by the 8822B fast bandwidth toggle fix (#584)対応中かも @josephnef が今日担当しました。 オープンenhancement
難易度 4/5 3〜5日 初心者へのやさしさ 42/100
メンテナーはふだん 1 日以内に返信
-
難易度 5/5 1週間以上 初心者へのやさしさ 12/100
OpenIPC/devourer#579 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
enhancement
難易度 5/5 1週間以上 初心者へのやさしさ 12/100
メンテナーはふだん 1 日以内に返信
-
enhancement
難易度 5/5 1週間以上 初心者へのやさしさ 8/100
メンテナーはふだん 1 日以内に返信
OpenIPC/devourer の issue をすべて見る
似ている issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
メンテナーはふだん 1 日以内に返信
-
Needs-Triage
難易度 2/5 1〜3時間 初心者へのやさしさ 66/100
メンテナーはふだん 2 日以内に返信
-
issue: bug report
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
メンテナーはふだん 2 日以内に返信
-
cross-platform fix-now
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
メンテナーはふだん 1 日以内に返信
-
feature:index kind:crash status:confirmed triaged
難易度 2/5 1〜3時間 初心者へのやさしさ 77/100
clice-io/clice#1123 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信