Follow-ups left open by the station-series cleanup (#466)
Maintainer thường phản hồi trong vòng 1 ngày
Chưa có ai nhận issue này.
Đánh giá
- Độ khó
- 4/5
- Thời gian dự kiến
- 3-5 ngày
- Mức phù hợp với người mới
- 35/100
- Loại issue
- Lỗi
- Độ rõ ràng
- Khá rõ ràng
- Mức độ hoạt động
- Sôi nổi
- Lĩnh vực
- embedded-iot, testing
Hướng nghiên cứu
Start by reading docs/mt7612u-tx-retry.md and the station harnesses named in the issue: realtek_station_onair.sh, mt7612u_sta_identity.sh, mt7612u_sta_uplink.sh, and mt7612u_ap_onair.sh; inspect the gate_txs implementation and related harness tests. The issue lists several independent fixes and observations, so confirm which follow-ups remain before changing anything. Done means correcting the actionable harness behaviors and documenting the settling limitation, with tests or hardware runs confirming the results.
Do mô hình lập chỉ mục viết ra từ nội dung của issue.
Mô tả
Left open by #466 (merged as 1134df9): the station-series review follow-ups, part of the #465 harness sweep, the #461 stale-EXT claim in gate_txs, and the txdemo thread-join guards.
From the review (hardware: realtek_station_onair 5/5 on 8812CU + 8812BU + MT7612U AP; uplink A/B against master)
gate_txsstale-EXT claim can over-attribute. One arm on the review bench read61/60, 1 stale-EXT entries claimed, 11 foreign: the arm then received all 60 of its own entries, so the claimed one was not its own (or a MAC duplicate). Printed, not clipped, butsuccessis inflated by one. Suggested self-correction: track own-pktid entries separately and at arm end, if own == n and stale_ext == 1, move the claimed entry back tolate_prev.- The
stale_settledgate cascades. One UNSETTLED arm disables the claim for every following arm until one settles on its own - a chain of seven consecutive 59/60 arms on the review bench. Correct by the documented rule;docs/mt7612u-tx-retry.mdshould say the claim buys little on a unit whose arms do not settle. - The #461 multi-entry loss is far worse on a second unit. Unicast-to-peer gate arms (b-e) landed 0-11/60 own entries on both passes, ~10 per arm carrying the previous arm's pktid, identical on master. Not this PR; recorded here so #461 has the second data point.
realtek_station_onair.sh:tail_mscan be negative (-6 ms in arm C: the finaltx.statstpreceded the lasttx.reportt). Harmless tolive; clamp at 0 or note it in thesummarizecomment.mt7612u_sta_identity.sh: an overrun BSSID gate setsr_bss=2, but the verdictcasehas only0,3,*, so the operator reads "did not pass" for what the exit code calls INCONCLUSIVE. Add a2)branch.mt7612u_sta_uplink.sh:dut_boundis per harness arm (552 s at FRAMES=60, 1128 s at 200) while the header's 25-minute figure covers both arms; the margin for the slower un-ACKed arm at FRAMES=200 is thin. Size it from the measured figure.mt7612u_ap_onair.sh: on the KILL pathreapdropsKIDSwithoutwaiting the killed children, leaving zombies for the rest of the run.- Firmware readability preflight (#465 class). On a host whose MediaTek firmware is zstd-compressed (
/lib/firmware/mediatek/*.bin.zst),sta_fw_linksucceeds, the probe logscannot open firmware/mt7662_rom_patch.bin, and the uplink harness scoresABORTED the DUT did not confirm retry limit 15:with an empty reason. Checking the two blobs are readable through the link turns a dead rig into a refusal in seconds.
From the PR description
- Find the uplink harness's multi-entry status loss (#461).
- Unify the INT/TERM exit code across the station harnesses: realtek_station_onair, mt7612u_sta_onair and mt7612u_sta_identity exit 3; autoack, uplink and ap_onair still exit 130.
- From #465, not in #466: the generic Realtek DUT take, the reconnect cell and the CCMP soak (separate PR).
Done by the review, no action
- The "last arm that sent" form of the stale-EXT claim is now hardware-run (it coincided with the previous-arm form: no arm had every submit fail). The claim fired correctly on the session's first arm: 60/60 with 1 claimed on #466 against 59/60 UNSETTLED with 1 foreign on master.
- Ngôn ngữ chính
- C
- Star
- 56
- Fork
- 29
- Merge trung bình
- 3 giờ 43 phút
- Pull request đã merge (30 ngày)
- 75
Chuẩn bị môi trường
Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.
Bắt đầu từ đâu
- Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
- Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
- Fork repository và làm thay đổi trên một nhánh.
- Mở pull request có tham chiếu số hiệu của issue.
Issue khác của OpenIPC/devourer
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 82/100
Maintainer thường phản hồi trong vòng 1 ngày
-
Follow-ups left open by the 8822B fast bandwidth toggle fix (#584)Có thể đã có người làm @josephnef đã nhận hôm nay. Đang mởenhancement
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 42/100
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 5/5 Hơn một tuần Mức phù hợp với người mới 12/100
OpenIPC/devourer#579 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
-
enhancement
Độ khó 5/5 Hơn một tuần Mức phù hợp với người mới 12/100
Maintainer thường phản hồi trong vòng 1 ngày
-
enhancement
Độ khó 5/5 Hơn một tuần Mức phù hợp với người mới 8/100
Maintainer thường phản hồi trong vòng 1 ngày
Tất cả issue của OpenIPC/devourer
Issue tương tự
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 72/100
Maintainer thường phản hồi trong vòng 1 ngày
-
Needs-Triage
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 66/100
Maintainer thường phản hồi trong vòng 2 ngày
-
issue: bug report
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 82/100
Maintainer thường phản hồi trong vòng 2 ngày
-
cross-platform fix-now
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 76/100
Maintainer thường phản hồi trong vòng 1 ngày
-
feature:index kind:crash status:confirmed triaged
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 77/100
clice-io/clice#1123 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày