std::jthread in #410/#411 breaks libc++ consumers — it is an incomplete feature there, and both uses are measurement-only

オープン
#426 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
3/5
見積もり時間
1〜2日
初心者へのやさしさ
48/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
活発
技術スタック
android, cmake, cpp

調査の方向性

Read the two measurement-only uses in src/rtl8733b/Rtl8733bDevice.cpp and src/jaguar1/RtlJaguarDevice.cpp, introduced by #410 and #411, and compare their stop-token polling loops. Reproduce the libc++ build failure with an Android NDK toolchain, noting that r26 lacks the header and r27 requires -fexperimental-library. Done means resolving the libc++ compile failure without imposing an experimental-library requirement on consumers.

索引モデルが issue の本文から書いたものです。

説明

Summary

std::jthread / std::stop_token entered the tree in #410 (src/rtl8733b/Rtl8733bDevice.cpp) and #411 (src/jaguar1/RtlJaguarDevice.cpp). devourer asks for cxx_std_20, which is correct in principle — but on libc++ these two are shipped as incomplete features, so a C++20 libc++ toolchain does not provide them by default. Any consumer building devourer against libc++ without -fexperimental-library now fails to compile.

What it looks like

src/jaguar1/RtlJaguarDevice.cpp:1621:8: error: no type named 'jthread' in namespace 'std'; did you mean 'thread'?
src/jaguar1/RtlJaguarDevice.cpp:1635:47: error: no type named 'stop_token' in namespace 'std'

followed by a cascade of variable ... cannot be implicitly captured in a lambda with no capture-default specified from the lambda that was meant to take std::stop_token.

Why the standard level is not the lever

In libc++'s __config:

#  if !defined(_LIBCPP_ENABLE_EXPERIMENTAL) && !defined(_LIBCPP_BUILDING_LIBRARY)
#    define _LIBCPP_HAS_NO_INCOMPLETE_PSTL
#    define _LIBCPP_HAS_NO_EXPERIMENTAL_STOP_TOKEN
...

and __thread/jthread.h is guarded on _LIBCPP_STD_VER >= 20 && !defined(_LIBCPP_HAS_NO_EXPERIMENTAL_STOP_TOKEN). <thread> includes that header unconditionally, so it simply declares no jthread — at any -std= level.

Measured on the Android NDK, which is the case I hit:

NDK libc++ result
r26.3 no <stop_token> header at all cannot build, no flag helps
r27.3 header present, gated builds only with -fexperimental-library

libstdc++ has had jthread since GCC 10, so glibc/GCC targets are unaffected — which is likely why CI is green.

What makes this worth raising

Both uses are measurement-only paths. The Jaguar1 one is reached only when DEVOURER_ACK_DISARM_AFTER_MS is set — the comment above it says "Measurement-only live disarm". So an opt-in debug feature that most consumers will never enable is imposing a libc++-experimental requirement on all of them, at compile time.

Options, in the order I'd suggest

  1. Drop jthread for std::thread + an atomic stop flag. Both sites already poll in a 25 ms quantum loop and already hold a mutex for the real work, so the stop token is buying very little; a std::atomic<bool> plus an explicit join in the same scope is a near-mechanical substitution and removes the dependency outright.
  2. Guard the feature, so the code compiles only where the library has it (#if !defined(_LIBCPP_HAS_NO_EXPERIMENTAL_STOP_TOKEN) or a CMake option). Keeps the feature for the toolchains that can build it.
  3. Document it — state the libc++ requirement and that consumers need -fexperimental-library. Cheapest, but it leaves the trap in place for the next consumer, and a measurement-only path is a surprising thing to pay for.

Happy to send a PR for (1) if you think it is the right shape.

Workaround in the meantime

Target-scoped, from the consumer's own CMake, not a patch to devourer:

if(ANDROID)
    target_compile_options(devourer PRIVATE -fexperimental-library)
endif()

plus NDK r27 or newer — r26 cannot be rescued this way, as the header is absent.

主要言語
C
スター
56
フォーク
29
平均マージ
3時間 43分
マージ済み PR(30日)
75

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

OpenIPC/devourer のほかの issue

OpenIPC/devourer の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。