std::jthread in #410/#411 breaks libc++ consumers — it is an incomplete feature there, and both uses are measurement-only

Đang mở
#426 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Maintainer thường phản hồi trong vòng 1 ngày

Chưa có ai nhận issue này.

Đánh giá

Độ khó
3/5
Thời gian dự kiến
1-2 ngày
Mức phù hợp với người mới
48/100
Loại issue
Lỗi
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
android, cmake, cpp
Lĩnh vực
backend, build-system

Hướng nghiên cứu

Read the two measurement-only uses in src/rtl8733b/Rtl8733bDevice.cpp and src/jaguar1/RtlJaguarDevice.cpp, introduced by #410 and #411, and compare their stop-token polling loops. Reproduce the libc++ build failure with an Android NDK toolchain, noting that r26 lacks the header and r27 requires -fexperimental-library. Done means resolving the libc++ compile failure without imposing an experimental-library requirement on consumers.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

Summary

std::jthread / std::stop_token entered the tree in #410 (src/rtl8733b/Rtl8733bDevice.cpp) and #411 (src/jaguar1/RtlJaguarDevice.cpp). devourer asks for cxx_std_20, which is correct in principle — but on libc++ these two are shipped as incomplete features, so a C++20 libc++ toolchain does not provide them by default. Any consumer building devourer against libc++ without -fexperimental-library now fails to compile.

What it looks like

src/jaguar1/RtlJaguarDevice.cpp:1621:8: error: no type named 'jthread' in namespace 'std'; did you mean 'thread'?
src/jaguar1/RtlJaguarDevice.cpp:1635:47: error: no type named 'stop_token' in namespace 'std'

followed by a cascade of variable ... cannot be implicitly captured in a lambda with no capture-default specified from the lambda that was meant to take std::stop_token.

Why the standard level is not the lever

In libc++'s __config:

#  if !defined(_LIBCPP_ENABLE_EXPERIMENTAL) && !defined(_LIBCPP_BUILDING_LIBRARY)
#    define _LIBCPP_HAS_NO_INCOMPLETE_PSTL
#    define _LIBCPP_HAS_NO_EXPERIMENTAL_STOP_TOKEN
...

and __thread/jthread.h is guarded on _LIBCPP_STD_VER >= 20 && !defined(_LIBCPP_HAS_NO_EXPERIMENTAL_STOP_TOKEN). <thread> includes that header unconditionally, so it simply declares no jthread — at any -std= level.

Measured on the Android NDK, which is the case I hit:

NDK libc++ result
r26.3 no <stop_token> header at all cannot build, no flag helps
r27.3 header present, gated builds only with -fexperimental-library

libstdc++ has had jthread since GCC 10, so glibc/GCC targets are unaffected — which is likely why CI is green.

What makes this worth raising

Both uses are measurement-only paths. The Jaguar1 one is reached only when DEVOURER_ACK_DISARM_AFTER_MS is set — the comment above it says "Measurement-only live disarm". So an opt-in debug feature that most consumers will never enable is imposing a libc++-experimental requirement on all of them, at compile time.

Options, in the order I'd suggest

  1. Drop jthread for std::thread + an atomic stop flag. Both sites already poll in a 25 ms quantum loop and already hold a mutex for the real work, so the stop token is buying very little; a std::atomic<bool> plus an explicit join in the same scope is a near-mechanical substitution and removes the dependency outright.
  2. Guard the feature, so the code compiles only where the library has it (#if !defined(_LIBCPP_HAS_NO_EXPERIMENTAL_STOP_TOKEN) or a CMake option). Keeps the feature for the toolchains that can build it.
  3. Document it — state the libc++ requirement and that consumers need -fexperimental-library. Cheapest, but it leaves the trap in place for the next consumer, and a measurement-only path is a surprising thing to pay for.

Happy to send a PR for (1) if you think it is the right shape.

Workaround in the meantime

Target-scoped, from the consumer's own CMake, not a patch to devourer:

if(ANDROID)
    target_compile_options(devourer PRIVATE -fexperimental-library)
endif()

plus NDK r27 or newer — r26 cannot be rescued this way, as the header is absent.

Ngôn ngữ chính
C
Star
56
Fork
29
Merge trung bình
3 giờ 43 phút
Pull request đã merge (30 ngày)
75

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của OpenIPC/devourer

Tất cả issue của OpenIPC/devourer

Issue tương tự

Thêm issue về C

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.