pstops re-applies the PPD's default output order after pdftopdf, inverting explicit `outputorder` on face-up PostScript queues

Aperta
#119 0 commenti 0 reazioni 0 assegnatari Vedi su GitHub

I maintainer di solito rispondono entro 1 giorno

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
4/5
Tempo stimato
3-5 giorni
Idoneità per principianti
48/100
Tipo di issue
Bug
Chiarezza
Specificata chiaramente
Stato di attività
Attiva
Stack tecnologico
c
Ambito
backend

Direzione di ricerca

The filter chain drops OutputOrder in ppd/pdftops.c (ppdFilterPDFToPS, around L77–L91 and L595), and pstops then falls back to the PPD default in ppd/imagetops-pstops.c (around L4257–L4275, applied near L4385). Start by reproducing with cupsfilter -p ps.ppd -m application/vnd.cups-postscript -o outputorder=reverse test.pdf and the sample face-up OutputBin PPD. Done means explicit normal/reverse survives pstops while the PPD default applies only when the job omits outputorder, coordinated with libcupsfilters#366.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

This issue was found by Claude while preparing https://github.com/OpenPrinting/libcupsfilters/pull/366.


Describe the bug

On a PostScript PPD queue whose default output bin has *PageStackOrder ...: Reverse (or that has *DefaultOutputOrder: Reverse), an explicit output order in the job comes out inverted. pdftopdf applies the requested order, and then pstops reverses the pages again because of the PPD default.

Job option Printed order (3-page document)
none 3, 2, 1 (correct)
outputorder=reverse 1, 2, 3
outputorder=normal 3, 2, 1

To Reproduce

  1. Take a generic PostScript PPD, e.g. /usr/lib/cups/daemon/cups-driverd cat drv:///sample.drv/generic.ppd > ps.ppd, and append a face-up output bin:

    *OpenUI *OutputBin/Output Tray: PickOne
    *OrderDependency: 10 AnySetup *OutputBin
    *DefaultOutputBin: FaceUp
    *OutputBin FaceUp/Face Up: ""
    *PageStackOrder FaceUp: Reverse
    *CloseUI: *OutputBin
    
  2. Run a 3-page PDF with numbered pages through the filter chain (pdftopdf, pdftops):

    cupsfilter -p ps.ppd -m application/vnd.cups-postscript -o outputorder=reverse test.pdf > out.ps
    
  3. See the pages in out.ps come out as 1, 2, 3. With -o outputorder=normal they come out as 3, 2, 1.

Running the pdftopdf and pdftops filters by hand with PPD=ps.ppd gives the same result. *DefaultOutputOrder: Reverse instead of the output bin behaves the same way.

Expected behavior

An explicit outputorder=reverse prints the pages in reverse order and outputorder=normal in normal order, as on queues without a reverse default. The PPD's default order should only apply when the job doesn't ask for one.

Screenshots

No screenshots; the relevant log line from cupsfilter with outputorder=reverse shows pstops reversing the already reversed pages:

DEBUG: ppdFilterPSToPS: slow_collate=0, slow_duplex=0, slow_order=1

System Information:

  • OS: Arch Linux
  • Version: libppd 2.1.1 (libppd master 93ed8499 has the same code)
  • Version of CUPS, libcupsfilters, ...: CUPS 2.4.20, cups-filters 2.0.1, libcupsfilters 2.2.1 (git 3bf18925) and master 89e4c33a with OpenPrinting/libcupsfilters#366

Additional context

When pdftopdf has run, ppdFilterPDFToPS() drops OutputOrder from the pstops options (pdftops.c L77–L91, L595). pstops then treats the missing option as "use the PPD default" (imagetops-pstops.c L4257–L4275) and reverses again (L4385).

Suggested fix: pass OutputOrder=Normal to pstops instead of dropping it, as Collate=True is added back (L609–L617). This needs coordinating with OpenPrinting/libcupsfilters#366, which leaves the default order of PostScript PPD queues to pstops because of this bug. A pdftopdf marker like %%PDFTOPDFNumCopies could tell libppd when pdftopdf has applied the order, so mixed versions keep working. Happy to help with either side.

Tested with the generic PPD above, not on a physical face-up PostScript printer.

Lingua principale
C
Stelle
6
Fork
38
Merge medio
16h 30m
PR unite (30g)
25

Preparare l'ambiente

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di OpenPrinting/libppd

Tutte le issue di OpenPrinting/libppd

Issue simili

Altre issue su C

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.