Completion markers assume command lists run in recording order
Maintainer antworten meist innerhalb von 1 Tag
Dieses Issue hat noch niemand übernommen.
Bewertung
- Schwierigkeit
- 5/5
- Geschätzter Aufwand
- Über eine Woche
- Anfängerfreundlichkeit
- 15/100
- Issue-Typ
- Bug
- Klarheit
- Größtenteils klar
- Aktivitätsstatus
- Aktiv
- Tech-Stack
- cpp
- Bereich
- operating-systems, performance
Rechercherichtung
Start from clean/rr_f/runtime/src/rr_runtime.cpp around marker_done (:496), pump (:505) and the slot wait (:2570), then look at the transient and arena release paths at :3448 and :3544. The fix is a design choice between a per-recording marker ring and documenting the submit-order contract. Done means the WARP test that records lists A (serial 1) and B (serial 2), runs only B, and asserts serial 1 is not done passes.
Vom Indexierungsmodell aus dem Issue-Text verfasst.
Beschreibung
What happens
Both runtimes use one scalar completion marker and treat "marker observed >= s" as "every recording up to s is done". The marker is written by the recorded list, so this only holds if lists execute in the order they were recorded.
- RR:
clean/rr_f/runtime/src/rr_runtime.cpp:496(marker_done),pump(:505), slot wait (:2570), frame marker (:3408), transient marker (:3525). - Model M:
clean/runtime/device_d3d12.cpp:400(end_external),:421(external_done),:996(wait_external).
Model M: the marker belongs to one device, so to one context. If one context's frames ran out of order, its temporal history would already be wrong, so this is not a case that matters in practice.
RR: the marker is runtime-wide (rt.marker, rt.serial) and shared by every instance and by transient copies. If instance B's list runs before instance A's earlier list, B's serial covers A's outstanding work, and defer_release of A's old arena (:3448) or of a transient (:3544) can release early. Out-of-order execution can also move the marker backwards, because the lower serial is written last. That causes slot-wait timeouts (:2572) and failed frames rather than a use-after-free.
When it can happen
Rarely. A use-after-free needs several RR instances (for example two viewports) with lists submitted out of order or on different queues, and an arena regrow, resize or transient release inside that window. Transient copies recorded on a list that is submitted after the evaluate list already break the data dependency.
Found by reading the code. It has not been reproduced.
To do
This is a design discussion. Options:
- Replace the single maximum with a per-recording marker ring. The readback buffer is 256 bytes, so 64 dwords. Each recording writes its serial into dword
s % N, and recordingsis done when that dword equalss(low 32 bits) or a later serial that maps to the same dword. Bound the recordings in flight to N; the slot waits already bound this. Wrap handling needs care. - Or document the contract: one RR instance at a time, or submit in recording order.
Test
WARP. Record list A (serial 1), then list B (serial 2), using only WriteBufferImmediate. Execute B alone and wait for the queue. Assert that "serial 1 done" is false. This fails today and would pass with the ring.
Related: #63, #62, #65.
- Vorherrschende Sprache
- C++
- Sterne
- 12
- Forks
- 2
- Ø Merge
- 3 Std. 10 Min.
- Gemergte PRs (30 T.)
- 171
Entwicklungsumgebung
- Kein Dockerfile und keine Docker-Compose-Datei
- Hat eine Pull-Request-Vorlage
- Beitragsleitfaden lesen
Erste Schritte
- Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
- Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
- Forken Sie das Repository und arbeiten Sie in einem Branch.
- Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.
Mehr aus phantoslayer21/wronggpu
-
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 88/100
phantoslayer21/wronggpu#275 ·
Maintainer antworten meist innerhalb von 1 Tag
-
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 82/100
phantoslayer21/wronggpu#274 ·
Maintainer antworten meist innerhalb von 1 Tag
-
bug
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 88/100
phantoslayer21/wronggpu#241 ·
Maintainer antworten meist innerhalb von 1 Tag
-
bug build
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 74/100
phantoslayer21/wronggpu#234 ·
Maintainer antworten meist innerhalb von 1 Tag
-
bug build
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 80/100
phantoslayer21/wronggpu#233 ·
Maintainer antworten meist innerhalb von 1 Tag
Alle Issues in phantoslayer21/wronggpu
Ähnliche Issues
-
ai_p2
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 80/100
ClickHouse/ClickHouse#132519 ·
Maintainer antworten meist innerhalb von 1 Tag
-
[Bug]: VST3 getMidiControllerAssignment reads past midiControllerToParameter for program changeOffen
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 76/100
juce-framework/JUCE#1810 ·
-
Schwierigkeit 1/5 Unter einer Stunde Anfängerfreundlichkeit 82/100
petercorke/robotics-toolbox-python#952 ·
Maintainer antworten meist innerhalb von 1 Tag
-
NatronRenderer: a Python error in the script (-t / project script) doesn't change the exit statusOffenfunc:engine type:bug
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 72/100
NatronGitHub/Natron#1276 ·
Maintainer antworten meist innerhalb von 1 Tag
-
Schwierigkeit 1/5 1-3 Stunden Anfängerfreundlichkeit 77/100
Maintainer antworten meist innerhalb von 1 Tag