Completion markers assume command lists run in recording order
维护者通常 1 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 5/5
- 预计耗时
- 一周以上
- 新手友好度
- 15/100
- Issue 类型
- 缺陷
- 描述清晰度
- 基本清楚
- 活跃度
- 活跃
- 技术栈
- cpp
调研方向
Start from clean/rr_f/runtime/src/rr_runtime.cpp around marker_done (:496), pump (:505) and the slot wait (:2570), then look at the transient and arena release paths at :3448 and :3544. The fix is a design choice between a per-recording marker ring and documenting the submit-order contract. Done means the WARP test that records lists A (serial 1) and B (serial 2), runs only B, and asserts serial 1 is not done passes.
由索引模型根据 Issue 内容生成。
描述
What happens
Both runtimes use one scalar completion marker and treat "marker observed >= s" as "every recording up to s is done". The marker is written by the recorded list, so this only holds if lists execute in the order they were recorded.
- RR:
clean/rr_f/runtime/src/rr_runtime.cpp:496(marker_done),pump(:505), slot wait (:2570), frame marker (:3408), transient marker (:3525). - Model M:
clean/runtime/device_d3d12.cpp:400(end_external),:421(external_done),:996(wait_external).
Model M: the marker belongs to one device, so to one context. If one context's frames ran out of order, its temporal history would already be wrong, so this is not a case that matters in practice.
RR: the marker is runtime-wide (rt.marker, rt.serial) and shared by every instance and by transient copies. If instance B's list runs before instance A's earlier list, B's serial covers A's outstanding work, and defer_release of A's old arena (:3448) or of a transient (:3544) can release early. Out-of-order execution can also move the marker backwards, because the lower serial is written last. That causes slot-wait timeouts (:2572) and failed frames rather than a use-after-free.
When it can happen
Rarely. A use-after-free needs several RR instances (for example two viewports) with lists submitted out of order or on different queues, and an arena regrow, resize or transient release inside that window. Transient copies recorded on a list that is submitted after the evaluate list already break the data dependency.
Found by reading the code. It has not been reproduced.
To do
This is a design discussion. Options:
- Replace the single maximum with a per-recording marker ring. The readback buffer is 256 bytes, so 64 dwords. Each recording writes its serial into dword
s % N, and recordingsis done when that dword equalss(low 32 bits) or a later serial that maps to the same dword. Bound the recordings in flight to N; the slot waits already bound this. Wrap handling needs care. - Or document the contract: one RR instance at a time, or submit in recording order.
Test
WARP. Record list A (serial 1), then list B (serial 2), using only WriteBufferImmediate. Execute B alone and wait for the queue. Assert that "serial 1 done" is false. This fails today and would pass with the ring.
Related: #63, #62, #65.
- 主要语言
- C++
- 星标
- 12
- 派生
- 2
- 平均合并
- 3 小时 10 分钟
- 30 天内合并 PR
- 171
环境准备
- 没有 Dockerfile 或 Docker Compose 文件
- 有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
phantoslayer21/wronggpu 的其他 Issue
-
难度 2/5 1-3 小时 新手友好度 88/100
phantoslayer21/wronggpu#275 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 82/100
phantoslayer21/wronggpu#274 ·
维护者通常 1 天内回复
-
bug
难度 2/5 1-3 小时 新手友好度 88/100
phantoslayer21/wronggpu#241 ·
维护者通常 1 天内回复
-
bug build
难度 2/5 1-3 小时 新手友好度 74/100
phantoslayer21/wronggpu#234 ·
维护者通常 1 天内回复
-
bug build
难度 2/5 1-3 小时 新手友好度 80/100
phantoslayer21/wronggpu#233 ·
维护者通常 1 天内回复
查看 phantoslayer21/wronggpu 的全部 Issue
相似的 Issue
-
难度 1/5 1-3 小时 新手友好度 77/100
维护者通常 1 天内回复
-
bug good first issue
难度 2/5 1-3 小时 新手友好度 75/100
ReyeMe/SaturnRingLib#155 ·
-
bug
难度 2/5 1-3 小时 新手友好度 62/100
Nheko-Reborn/nheko#2092 ·
-
难度 1/5 1-3 小时 新手友好度 78/100
isocpp/CppCoreGuidelines#2345 ·
-
难度 2/5 1-3 小时 新手友好度 71/100
ROCm/rocm-libraries#16108 ·
维护者通常 2 天内回复