mobile: a Mac on Cloudflare WARP is not reachable on its published addresses

Offen
#113 1 Kommentar 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Maintainer antworten meist innerhalb von 1 Tag

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
4/5
Geschätzter Aufwand
3-5 Tage
Anfängerfreundlichkeit
45/100
Issue-Typ
Bug
Klarheit
Größtenteils klar
Aktivitätsstatus
Aktiv
Tech-Stack
macos, rust
Bereich
mobile, networking

Rechercherichtung

Start from the atlas-host mobile test setup and the protocol tests that now dial loopback on the published ports, then trace where the endpoint publishes its addresses. Reproduce on a WARP-enabled Mac and determine whether LAN replies are routed through the tunnel. Done means either a reachability test covering tunnel interfaces or a documented limitation, plus a recorded decision on publishing 100.64.0.0/10 and tunnel addresses.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

Found running atlas-host mobile tests on a dev Mac with WARP (utun4 100.96.0.1, IPv6 2606:4700:…). The endpoint publishes 100.96.0.1, 192.168.68.50 and three IPv6 addresses; an iroh client on the same machine dialing all of them (Minimal preset, no relay) times out after 30 s, the LAN address included. CI has no tunnel and passes.

Open question: does a phone on the same LAN reach that Mac when WARP is on, or does WARP route the replies through the tunnel? If not, pairing silently fails for every WARP user.

The protocol tests now dial loopback on the published ports (they test pairing/scopes, not reachability), so this is tracked here instead of failing the gate on WARP machines. Needs: a reachability test (or doc) for tunnel interfaces, and a decision on publishing 100.64.0.0/10 / tunnel addresses.

Vorherrschende Sprache
Rust
Sterne
3
Forks
1
Ø Merge
9 Std. 51 Min.
Gemergte PRs (30 T.)
310

Entwicklungsumgebung

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus codeatlasdev/atlas

Alle Issues in codeatlasdev/atlas

Ähnliche Issues

Weitere Issues zu Rust

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.