mobile: a Mac on Cloudflare WARP is not reachable on its published addresses

Aberta
#113 1 comentário 0 reações 0 responsáveis Ver no GitHub

Mantenedores costumam responder em até 1 dia

Ninguém assumiu esta issue ainda.

Avaliação

Dificuldade
4/5
Tempo estimado
3-5 dias
Facilidade para iniciantes
45/100
Tipo de issue
Bug
Clareza
Razoavelmente clara
Status de atividade
Ativa
Stack de tecnologia
macos, rust
Domínio
mobile, networking

Direção de pesquisa

Start from the atlas-host mobile test setup and the protocol tests that now dial loopback on the published ports, then trace where the endpoint publishes its addresses. Reproduce on a WARP-enabled Mac and determine whether LAN replies are routed through the tunnel. Done means either a reachability test covering tunnel interfaces or a documented limitation, plus a recorded decision on publishing 100.64.0.0/10 and tunnel addresses.

Escrita pelo modelo de indexação a partir do texto da issue.

Descrição

Found running atlas-host mobile tests on a dev Mac with WARP (utun4 100.96.0.1, IPv6 2606:4700:…). The endpoint publishes 100.96.0.1, 192.168.68.50 and three IPv6 addresses; an iroh client on the same machine dialing all of them (Minimal preset, no relay) times out after 30 s, the LAN address included. CI has no tunnel and passes.

Open question: does a phone on the same LAN reach that Mac when WARP is on, or does WARP route the replies through the tunnel? If not, pairing silently fails for every WARP user.

The protocol tests now dial loopback on the published ports (they test pairing/scopes, not reachability), so this is tracked here instead of failing the gate on WARP machines. Needs: a reachability test (or doc) for tunnel interfaces, and a decision on publishing 100.64.0.0/10 / tunnel addresses.

Linguagem predominante
Rust
Estrelas
3
Forks
1
Merge médio
9h 51min
PRs com merge (30d)
310

Preparar o ambiente

Primeiros passos

  1. Leia a issue inteira e depois o guia de contribuição do projeto.
  2. Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
  3. Faça um fork do repositório e trabalhe em uma branch.
  4. Abra um pull request que referencie o número da issue.

Mais de codeatlasdev/atlas

Todas as issues de codeatlasdev/atlas

Issues semelhantes

Mais issues de Rust

Receba novas issues na sua caixa de entrada

Um resumo curto de issues do GitHub para quem está começando.