Model L: propagate a NaN through enc0's ReLU + FP8 step as the original does; converter check for non-finite weight codes
维护者通常 1 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 5/5
- 预计耗时
- 一周以上
- 新手友好度
- 35/100
- Issue 类型
- 缺陷
- 描述清晰度
- 描述清楚
- 活跃度
- 活跃
调研方向
Start with clean/l/reference/oracle.py and its _out_round relu_q8 mode, then compare the listed HIP and D3D12 kernels and the encoder block paths. Trace how the NaN-input case reaches the second linear and pack12 coefficients, and inspect clean/l/runner/l_hyb_stage_check.py for the separately reported leg. Done when the NaN cases match the oracle across implementations and the converter rejects non-finite weight codes with the stage and blob named.
由索引模型根据 Issue 内容生成。
描述
Problem
Model L's first input linear ends in a ReLU and an FP8 conversion: x1 = q8(max(0, RN16(b + W q))). When the
accumulator is NaN (a NaN input code in q, or a NaN weight code), the original keeps the NaN through the fused
ReLU + FP8 conversion. Our kernels give 0: max(0, NaN) returns 0 on the hardware and in the HIP code.
This affects every implementation of that step alike:
- main's kernels:
clean/l/kernels/l_ops.hip(linear_32_32<RELU = true>) and its D3D12 ports in
clean/dx12/kernels/l_ops_linear.hlsl(l_linear_32_32_relu,l_linear_32_32_fused, via
clean/dx12/hlsl/l_lin_px.hlsli); - the encoder block with the linears as its prologue (
clean/dx12/kernels/swin_block.hlslSW_SRC == 3,
clean/dx12/kernels/fused_swin.hlsl); - the hybrid twins of the same step (D3D12 and HIP).
The reference oracle (clean/l/reference/oracle.py, _out_round mode relu_q8) keeps the NaN, so the hybrid stage
check's random NaN-input cases differ from it (the second linear's chain and the pack12 coefficients downstream).
Finite inputs are unaffected.
Spec references: L P3 item 13; spec 05 edge cases. Spec 03 maps NaN inputs to 0, and real converted models contain no
FP8 NaN weight codes, so this is not visible on real data. It was kept out of 0.6.5.
Until it is fixed, the random-weight legs of clean/l/runner/l_hyb_stage_check.py draw finite codes only, and one
dedicated NaN-input leg is reported separately (listed, neither pass nor fail).
Proposed fix
- In every implementation listed above, make the ReLU + FP8 step keep a NaN as the original does (one form shared by
main's kernels, the hybrid twins and HIP, so the byte checks between them stay identical). - Fold the dedicated NaN-input leg back into the pass/fail random legs of
l_hyb_stage_check.pyonce the kernels
match the oracle.
Converter validation
Add a check to the model converter's validation: a real converted model must contain no non-finite weight codes (no FP8
NaN codes, no FP16 NaN or infinity in the converted blobs). A model that fails is refused with one line naming the stage
and blob.
Tests
l_hyb_stage_check.py: the NaN-input leg passes under the normal rule (then merged into the random legs).- The byte checks (HIP == D3D12) for the linears and the fused encoder block stay identical, NaN cases included.
- The converter check: one synthetic model with a NaN weight code is refused; the real models pass.
- 主要语言
- C++
- 星标
- 12
- 派生
- 2
- 平均合并
- 3 小时 10 分钟
- 30 天内合并 PR
- 171
环境准备
- 没有 Dockerfile 或 Docker Compose 文件
- 有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
phantoslayer21/wronggpu 的其他 Issue
-
难度 2/5 1-3 小时 新手友好度 88/100
phantoslayer21/wronggpu#275 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 82/100
phantoslayer21/wronggpu#274 ·
维护者通常 1 天内回复
-
bug
难度 2/5 1-3 小时 新手友好度 88/100
phantoslayer21/wronggpu#241 ·
维护者通常 1 天内回复
-
bug build
难度 2/5 1-3 小时 新手友好度 74/100
phantoslayer21/wronggpu#234 ·
维护者通常 1 天内回复
-
bug build
难度 2/5 1-3 小时 新手友好度 80/100
phantoslayer21/wronggpu#233 ·
维护者通常 1 天内回复
查看 phantoslayer21/wronggpu 的全部 Issue
相似的 Issue
-
ai_p2
难度 2/5 1-3 小时 新手友好度 80/100
ClickHouse/ClickHouse#132519 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 76/100
juce-framework/JUCE#1810 ·
-
难度 1/5 1 小时以内 新手友好度 82/100
petercorke/robotics-toolbox-python#952 ·
维护者通常 1 天内回复
-
NatronRenderer: a Python error in the script (-t / project script) doesn't change the exit status未关闭func:engine type:bug
难度 2/5 1-3 小时 新手友好度 72/100
NatronGitHub/Natron#1276 ·
维护者通常 1 天内回复
-
难度 1/5 1-3 小时 新手友好度 77/100
维护者通常 1 天内回复