Hacktoberfest 2026：维护者为十月标记出来的 issue，仍然开放、适合新手。 浏览 Hacktoberfest issue

Limrun Android: `fill` inserts at the cursor instead of replacing the field's text

已关闭
  • 哪里不对？
#3,358 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

已经有一个关联 PR 被合并了。

  • #3362 来自 @thymikee —— 已合并

评估

难度
3/5
预计耗时
1-2 天
新手友好度
62/100
Issue 类型
缺陷
描述清晰度
描述清楚
活跃度
活跃
技术栈
android, typescript
领域
mobile

调研方向

Start in the Android fill path where agent-device returns after the provider-native provider.text call, since that call skips the adb clear, verify and retry steps (KEYCODE_MOVE_END and KEYCODE_DEL). The Limrun instance client's setText and pressKey calls are the relevant entry points. Done means fill on a field with existing text leaves exactly the new value, and a mismatch is reported rather than passing silently. Reproduce with the Settings search field commands in the issue.

由索引模型根据 Issue 内容生成。

描述

Summary

On a Limrun Android instance, fill does not replace the existing contents of a text field. The new text is inserted wherever the tap leaves the cursor, so filling a field that already has a value produces a concatenation of the old and new text. The help text says fill <target> <text> replaces, and that is what happens on local emulators.

Environment

  • agent-device: 0.21.15, and the same code path is present in 0.21.24 (latest at the time of writing)
  • Provider: Limrun, Android instance (agent-device connect limrun --platform android)
  • Keyboard on the instance: com.android.inputmethod.latin (the agent-device test IME is not active)
  • App: the system Settings app (any EditText reproduces it)

Steps to reproduce

agent-device connect limrun --platform android --run-id fill-repro --session repro
agent-device open settings --platform android --session repro
agent-device snapshot -i --platform android --session repro   # find "Search Settings"
agent-device click @e2 --platform android --session repro      # opens the search field
agent-device fill @e7 "[email protected]" --platform android --session repro
agent-device fill @e7 "[email protected]" --platform android --session repro
agent-device snapshot -i --platform android --session repro

Expected

After the second fill, the field contains:

[email protected]

Actual

The second fill taps the field center, which puts the cursor inside the existing value, and inserts the text there:

[email protected][email protected]

Both fill calls exit successfully. A caller that does not re-read the field carries on with the wrong value.

Cause

On Android, fill first checks whether the device provider supplies its own text entry. Limrun does (provider.text → the Limrun instance client's setText({ x, y }, text)), so agent-device returns after that call. It never reaches the Android path that clears the field (KEYCODE_MOVE_END + KEYCODE_DEL), verifies the result and retries, or uses the test IME.

Calling the Limrun Android instance client directly on the same instance shows that setText never replaces:

Call Result
setText({ x, y }, text) (what agent-device sends) inserted at the cursor
setText({ selector: { focused: true } }, text) inserted at the cursor
setText(undefined, text) inserted at the cursor
setText({ selector: { focused: true } }, '') rejected: text is required

So with the provider-native path there is currently no way to clear the field before typing.

Workaround that worked

Selecting all and deleting with hardware key events before setText, through the same Limrun instance client:

await client.pressKey('a', ['ctrl']);
await client.pressKey('del');
await client.setText(undefined, text);

This left the field holding exactly the requested text in 3 of 3 runs. The select and delete took about 350 ms together; setText took about 1 s.

Suggested fix

For a Limrun Android fill, clear the focused field before the provider-native setText (for example with the Ctrl+A / Delete key events above), then run the existing verification so a mismatch is reported instead of passing silently. Alternatively, route Limrun Android fill through the existing adb clear/verify/retry path or the test IME.

Possibly related (not reproduced)

In one run, a fill into a field that had just taken focus from another field lost its first character (jane… arrived as ane…). I could not reproduce it on a single field in 4 attempts, so it is mentioned only in case it shares the cause.

主要语言
TypeScript
星标
4.9k
派生
328
平均合并
12 小时 18 分钟
30 天内合并 PR
561

环境准备

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 阅读贡献指南

从这里开始

  1. 先读完整个 Issue，再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库，在一个分支上完成修改。
  4. 提交 Pull Request，并在描述里引用这个 Issue 编号。

callstack/agent-device 的其他 Issue

查看 callstack/agent-device 的全部 Issue

相似的 Issue

更多 TypeScript Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。